PIC16F628A internal oscillator

Closed Thread
Results 1 to 6 of 6
  1. - 6th May 2010, 21:31 #1
    azra01's Avatar
    azra01
    azra01 is offline Junior Member
    Join Date
    Dec 2009
    Posts
    6

    Question PIC16F628A internal oscillator

    Hello!

    I have one question for you: How to define internal oscillator for PIC16F628A in the MicroCode Studio.

    I tried @ DEVICE INTRC_OSC_NOCLKOUT, but I got error: "undefined symbol intrc_osc_noclkout"

    Help!
  2. - 7th May 2010, 01:35 #2
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    Try
    _INTOSC_OSC_NOCLKOUT
    Dave
    Always wear safety glasses while programming.
  3. - 7th May 2010, 02:26 #3
    Archangel's Avatar
    Archangel
    Archangel is offline SuperMod
    Join Date
    Aug 2006
    Location
    Look, behind you.
    Posts
    2,818

    Did you find this post helpful? Yes | No

    Default

    Look at this thread, pay attention to punctuation, and syntax, er ah just copy paste what Melanie did BUT read for understanding this entire thread, It is probably the most important thread here. It is what All the books forget to tell you.
    If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
    .
    Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
    .
    There simply is no "Happy Spam" If you do it you will disappear from this forum.
  4. - 7th May 2010, 03:43 #4
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by Joe S. View Post
    Look at this thread, pay attention to punctuation, and syntax, er ah just copy paste what Melanie did BUT read for understanding this entire thread, It is probably the most important thread here. It is what All the books forget to tell you.
    http://www.picbasic.co.uk/forum/showthread.php?t=543
    Dave
    Always wear safety glasses while programming.
  5. - 7th May 2010, 06:05 #5
    Archangel's Avatar
    Archangel
    Archangel is offline SuperMod
    Join Date
    Aug 2006
    Location
    Look, behind you.
    Posts
    2,818

    Did you find this post helpful? Yes | No

    Default Doh !

    Quote Originally Posted by mackrackit View Post
    http://www.picbasic.co.uk/forum/showthread.php?t=543
    Doh, the hurried-er I go the behind-er I get ! Got interrupted by a Drive By shooting here in the hood. That's my story and I am sticking to it ! Thanks Dave ! That is the one
    If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
    .
    Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
    .
    There simply is no "Happy Spam" If you do it you will disappear from this forum.
  6. - 7th May 2010, 07:53 #6
    Darrel Taylor's Avatar
    Darrel Taylor
    Darrel Taylor is offline Fanatical Contributor
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by azra01 View Post
    ... I tried @ DEVICE INTRC_OSC_NOCLKOUT, but I got error: "undefined symbol intrc_osc_noclkout"
    Although this was posted in the PIC BASIC forum, you are probably using PicBasic Pro.
    If using PBC that line would have given an Invalid Symbol error. PBC doesn't allow the @ symbol.

    I would guess that you have the wrong chip selected in the Device drop-down in MicroCode Studio.

    If you don't see a Device drop-down in the toolbar, go to View > Toolbars and make sure Compile and Program is checked.

    hth,
    DT
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules