MCSPlus serial interface to EasyPIC6 not working?

Results 1 to 34 of 34

Threaded View

  1. - 5th March 2010, 04:14 #8
    Bruce's Avatar
    Bruce
    Bruce is offline Prolific Poster
    Join Date
    Jul 2003
    Posts
    2,405

    Default

    Set SW7.1 on for RC7 = RX and SW8.1 on for RC6 - TX
    On SW7 & SW8 flip everything else to the OFF position leaving only switches #8 on each one ON. Does it work?

    In: http://www.mikroe.com/pdf/easypic6/e...anual_v100.pdf the photo in Figure 6-1 shows both DIP
    switches for RC6 & RC7 on switch positions #1.

    And just below this in Figure 6-2 they show RC6 & RC7 on DIP switch positions #8. Which is right?
    Last edited by Bruce; - 5th March 2010 at 04:31. Reason: Which is right?
    Regards,

    -Bruce
    tech at rentron.com
    http://www.rentron.com
« Previous Thread | Next Thread »

Similar Threads

  1. Please help with EDE702 - Serial to LCD interface
    By Tomexx in forum mel PIC BASIC Pro
    Replies: 13
    Last Post: - 30th October 2008, 03:48
  2. 32-bit Quadrature Counter With Serial Interface
    By precision in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 10th June 2008, 03:49
  3. Serial interface with RFID reader
    By brid0030 in forum Serial
    Replies: 8
    Last Post: - 23rd January 2007, 07:23
  4. ifficult to get the serial interface GSM phon
    By kblim in forum GSM
    Replies: 0
    Last Post: - 25th November 2005, 15:35
  5. PIC16F877 to RFID Module Serial Interface
    By koossa in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 17th May 2005, 07:03

Members who have read this thread : 1

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules