PBP, 16F1827, FSR, and Error 113

Closed Thread
Results 1 to 12 of 12

Hybrid View

  1. - 24th February 2010, 22:13 #1
    Darrel Taylor's Avatar
    Darrel Taylor
    Darrel Taylor is offline Fanatical Contributor
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959

    Did you find this post helpful? Yes | No

    Default

    Russ,

    Are you using DT_INTS-14 version 1.0?
    http://www.darreltaylor.com/DT_INTS-14/intro2.html

    File is at the bottom of the page.

    It was updated for the 16F1 chips, and adds many INT sources.
    <br>
    DT
  2. - 24th February 2010, 22:24 #2
    RussMartin's Avatar
    RussMartin
    RussMartin is offline Member
    Join Date
    Aug 2006
    Location
    Omaha, Nebraska USA
    Posts
    263

    Did you find this post helpful? Yes | No

    Red face

    Quote Originally Posted by Darrel Taylor View Post
    Are you using DT_INTS-14 version 1.0?
    DOH! My "favorites" link still brings up the old page. I did look . . . apparently not well enough.

    Thanks!
    Russ
    N0EVC, xWB6ONT, xWN6ONT

    "Easy to use" is easy to say.
  3. - 24th February 2010, 22:48 #3
    Darrel Taylor's Avatar
    Darrel Taylor
    Darrel Taylor is offline Fanatical Contributor
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959

    Did you find this post helpful? Yes | No

    Default

    Yeah ... sorry.

    I haven't updated the main page yet, because I've received ZERO feedback from the people that I know downloaded it.

    I could assume that means it worked for them, or they would have complained.
    But until I get some idea if there's problems, I don't want that to be the file everyone downloads their first time.

    Love to know how you get along with it.

    Thanks,
    DT
  4. - 24th February 2010, 23:59 #4
    RussMartin's Avatar
    RussMartin
    RussMartin is offline Member
    Join Date
    Aug 2006
    Location
    Omaha, Nebraska USA
    Posts
    263

    Did you find this post helpful? Yes | No

    Default

    If my "blinky" is any indication, it works fine for INT_INT, which is the only one I'm using at the moment. I also tested it (INT_INT) in the full program, and it is working, both on the output and driving a "heartbeat" indicator at the same time. (It's a zero-crossing detector.)

    The rest of the program is problematic. As I mentioned, it worked on the 16F88, but only one channel works correctly on the 16F1827. I have to assume I have overlooked something in terms of managing and/or definining pins/ports, since each channel's code is identical.

    I may be yelling for help yet this evening.
    Russ
    N0EVC, xWB6ONT, xWN6ONT

    "Easy to use" is easy to say.
  5. - 25th February 2010, 01:15 #5
    Darrel Taylor's Avatar
    Darrel Taylor
    Darrel Taylor is offline Fanatical Contributor
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by RussMartin View Post
    If my "blinky" is any indication, it works fine for INT_INT, ...
    That's a start.
    Thanks!

    I may be yelling for help yet this evening.
    OK.

    Don't forget ...

    ANSELA = 0
    ANSELB = 0
    <br>
    DT
  6. - 26th February 2010, 00:32 #6
    RussMartin's Avatar
    RussMartin
    RussMartin is offline Member
    Join Date
    Aug 2006
    Location
    Omaha, Nebraska USA
    Posts
    263

    Did you find this post helpful? Yes | No

    Default

    I'll be working with TMR1 and IOC interrupts during the next few/several days (going back to the "reverse Simon says" project) and will let you know how those fare. NRN.
    Russ
    N0EVC, xWB6ONT, xWN6ONT

    "Easy to use" is easy to say.
  7. - 27th February 2010, 06:04 #7
    ScaleRobotics's Avatar
    ScaleRobotics
    ScaleRobotics is offline Prolific Poster
    Join Date
    Feb 2006
    Location
    Gilroy, CA
    Posts
    1,530

    Did you find this post helpful? Yes | No

    Thumbs up ver 1.00 of DT_INTS

    Quote Originally Posted by Darrel Taylor View Post
    I haven't updated the main page yet, because I've received ZERO feedback from the people that I know downloaded it.
    Darrel, your interrupt version 1.00 gets a thumbs up from me. I have only tried a few different types of interrupts with it, but it works great.
  8. - 13th January 2014, 09:04 #8
    ShoKre's Avatar
    ShoKre
    ShoKre is offline Junior Member
    Join Date
    Mar 2005
    Location
    CROATIA
    Posts
    38

    Did you find this post helpful? Yes | No

    Default Re: ver 1.00 of DT_INTS

    post deleted
    wrong treed
    i fond problem,
    my wrong file name save
    Last edited by ShoKre; - 13th January 2014 at 09:13.
« Previous Thread | Next Thread »

Members who have read this thread : 2

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules