16f887 and hserin/out

[Dennis]

Hi All

Just wondering if anyone has encountered weird behaviour with HSERIN/OUT using a 16F887 at all ?

I was using the 16F887 (hserout) as a receiver for data sent from a 18F4520 (hserin) as a receiver.

When I switch the roles so that the 16F887 is the transmitter and the 184520 is the receiver ... I either get mismatched data or no data at all !

Is it possible I have trhe wrong config settings for the registers on either side at all ?
for the 16F887 I have this

 'Set comparators off
CM1CON0 = %00000000
CM2CON0 = %00000000

OSCCON = %01110001          'Int CLK 8MHz
ANSEL = %00000000           'All digital
OPTION_REG.7 = 0            'Weak pull-ups enabled

DEFINE OSC 8                '8MHz
'TRIS statements
        TRISA  = %00000000 
        TRISB = %11111111  'for 4x4 keypad all input
        TRISC = %10100000 'PORTC.7 and C.5 are input
        TRISD = %00000000
        TRISE.0 = 0
        TRISE.1 = 0
        TRISE.2 = 0

and for the 18F4520 I have this

 OSCCON = $70            'Int CLK 8MHz
        OSCTUNE.6 = 1           'PLL 4x
        ADCON1= %00001111       '$0F = disable A/D converter
        cmcon   =   7 
        INTCON2.7 = 0     'switch pull-ups ON
'
        DEFINE OSC 32            '4x 8MHz
        TRISA  = %00000000 
        TRISB = %11111111  'for 4x4 keypad all input
        TRISC = %10010000 'PORTC.7 and C.4 are input
        TRISD = %00000000 'all output
        TRISE.0 = 0
        TRISE.1 = 0
        TRISE.2 = 0

Any suggestion would be appreciated.

Kind regards
Dennis