Processor halts : Please help

[cwmaddy]

Hello

Thanks a lot for pointing out the wsave error. I had accidentally deleted it and had some other logic in my mind.Things are more clear now. The error is not appearing for the test points I ran. I still do not understand the problem that interrupts might cause by putting basic statements inside asm . PICBasic takes care of such scenarios isn't it? Some other codes which I have written with such structures work perfectly fine.

Regards,
cwmaddy

[Darrel Taylor]

I still do not understand the problem that interrupts might cause by putting basic statements inside asm . PICBasic takes care of such scenarios isn't it? Some other codes which I have written with such structures work perfectly fine.

Then you've been lucky so far, because NO, PicBasic does NOT take care of such scenarios. That's why there's ON INTERRUPT, which allows basic language statements in an interrupt routine. Unfortunately, it also imposes severe limitations on how the interrupts are handled.

With ASM interrupts, you can get away with basic variable assignments like detTone = 0, or simple addition and subtraction timer1_ofcnt = timer1_ofcnt +1. But anything more complex like ... if timer0 > 240 then timer0 = 1, will need to use PBP's system variables which is a BIG No-No. Essentially, any command that places it's code in the "Library" will have this problem. Most definitely SEROUT will not work, and using those serouts in the ISR for debugging will cause new problems of their own, so you won't be seeing the problems you are trying to debug. And then in the getdtmf routine you've got a FOR loop, an ARRAY operation, and a lot of stuff that's commented out with multiple math terms and shifts and and ...<hr>

PBP sets aside several RAM locations with the variables R0 thru R8, some RR? RM? and T? variables. Most of them are listed in the PBPPIC14.RAM file in your PBP folder.

When a command starts, it copies any parameters to the system variables and calls the library routine to actually accomplish the task. As that command continues to run, those variables will be used to count loops, keeps track of time or different states as needed.

If an interrupt happens, it stops that command in the middle and jumps to the ISR. If in the ISR you now run a basic language statement that uses the library, it will copy it's parameters to the system variables in preparation to run the library routine, which overwrites everything that the command that was interrupted was using. The interrupt itself will work fine. But once it returns from the interrupt, the command that was previously running has no idea where it left off. And since the system variables now have data that was not even meant for that type of command, many different errors are possible, wrong answers, lock-ups, resets, invalid branches.

With DT_INTS that I pointed to previously, it saves the state of PBP's system variables, runs the ISR, then restores the system variables before returning from the ISR. This allows basic language statements to be used in ASM interrupts without corrupting PBP's normal flow.
<br>

[cwmaddy]

After reading this explaination, I feel if code that does not use PBP library is placed inside interrupt should work fine isnt it?
Eg statements line freqout, sound, pause, serouts will cause problems
but simple math/ array operations should work . Am I right?
If the code which is placed as BASIC code inside interrupt is getting modified at very selected locations in the program and we make sure the variable accesses are mutually exclusive then also it should not pose any problem.

If i dont want to use wsave1,2,3 , if I store wsave register in access location eg $70 , that should solve the purpose am I right?

I found the thread explaining about banks on the forum which saya the following thing-

"When a particular bank is selected with the RP0 and RP1 bits in the STATUS register, any opcode trying to access that bank is limited to 128 bytes. So, $20, $A0, $120 and $1A0 all point to a location that is 32 bytes into their respective BANK. The Variable declarations wsave1-3 are set that way to reserve the same locations in each bank.

That way you don't need to worry which bank you are in. The "MOVWF W_TEMP" always puts the byte in the correct location, no matter which bank is selected."

If my program is in bank1 and interrupt fires, my registers get stored in bank1.If my interrupt lies in different bank it just jumps to the bank (long jumps) and returns with long jump. It picks up wsave from that bank
If we give different offset of wsave1 and wsave, this interrupt handling should produce incorrect results. Am I right?

Thanks and regards,
cwmaddy