That workedNow ive just gotta read the datasheet and find out why
Thanx
|
|
ADCON0.0 is the start/stop bit of ADCON0.Originally Posted by The Master
That worked
Thanx
ADCON1 is where the pins are controlled. There is a table in the ADCON1 section.
Comparators are similar.
This also helps.
http://www.picbasic.co.uk/forum/showthread.php?t=561
Have Fun
Dave
Always wear safety glasses while programming.
|
Im sure ive been pointed to that thread before. I knew about the problem but i thought the settings i had would stop it. Aparently not. I must have misread the datasheet and completely overlooked CMCON.
I should probably read the whole datasheet when using a PIC. The only problem is that by about page 50 i cant remember what was on page 1. There are a few PICs (including the 16F877A) which seem to cover just about everything i do so hopefully if i just concentrate on these few ill get to know them better.
|
It just takes a little time. You are doing fine.
I only have a dozen or so chips that I use and many of them I do not use all of the features.
Still learning myself.
Dave
Always wear safety glasses while programming.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks