Need information about this Motor ?


Closed Thread
Results 1 to 40 of 40

Hybrid View

  1. #1
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924


    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by iugmoh View Post
    so what may be the purpose of these two wires ?
    I still think there is a good chance it is a compound motor.
    http://www.joliettech.com/connections_dc_motors.htm
    and yes the motor might turn with out the series winding hooked up, and yes if you applied voltage directly to these lead it very well could become skimasks backlight

    Here is some fun reading, the second half is DC.
    http://www.reliance.com/mtr/mtrthrmn.htm
    Dave
    Always wear safety glasses while programming.

  2. #2
    Join Date
    Aug 2006
    Location
    Look, behind you.
    Posts
    2,818


    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by mackrackit View Post
    I still think there is a good chance it is a compound motor.
    http://www.joliettech.com/connections_dc_motors.htm
    and yes the motor might turn with out the series winding hooked up, and yes if you applied voltage directly to these lead it very well could become skimasks backlight

    Here is some fun reading, the second half is DC.
    http://www.reliance.com/mtr/mtrthrmn.htm
    You may well be right! Time to disassemble and inspect to see what he has, I hope he has some experience with brushes and commutators.
    If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
    .
    Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
    .
    There simply is no "Happy Spam" If you do it you will disappear from this forum.

Similar Threads

  1. Replies: 19
    Last Post: - 27th May 2010, 03:56
  2. Controlling stepper motor with PIC
    By The Master in forum Off Topic
    Replies: 3
    Last Post: - 1st July 2008, 10:21
  3. DC motor parameters estimation !
    By iugmoh in forum General
    Replies: 1
    Last Post: - 6th June 2008, 17:29
  4. Info about Snubbers
    By mikebar in forum Schematics
    Replies: 11
    Last Post: - 27th April 2007, 08:56
  5. information on how to make servo motor
    By rod27cn in forum mel PIC BASIC Pro
    Replies: 13
    Last Post: - 17th December 2006, 11:59

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts