Power problems


Results 1 to 40 of 51

Thread: Power problems

Threaded View

  1. #29
    Join Date
    Jun 2008
    Posts
    84


    Did you find this post helpful? Yes | No

    Default

    btw, I've reached a point where my WW board is working, only when I use LONG wires to the external crystal.
    I guess this cause some kind of induction which makes it do work.
    I was using a very expensive wire (some kind of wire used in plans, teflon isolation, non melting) and it didn't work. Only when I used some simple 26 AWG wire it is working.
    go figure.
    Last edited by menta; - 29th July 2008 at 23:01.

Similar Threads

  1. Battery powered applications
    By NavMicroSystems in forum Off Topic
    Replies: 7
    Last Post: - 22nd June 2009, 07:12
  2. Pic getting part power from Analog Port
    By ShaneMichael in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 22nd April 2009, 10:34
  3. HSerin problems on power up
    By Luckyborg in forum Serial
    Replies: 8
    Last Post: - 21st April 2009, 19:49
  4. 12 Servo's together does not seem to work, Power problem
    By macx75 in forum mel PIC BASIC Pro
    Replies: 14
    Last Post: - 13th December 2006, 19:30
  5. problems on power up of PIC
    By dmairspotter in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 13th June 2006, 14:11

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts