PICKit2 - warning about configuration words

[flotulopex]

MPASM .INC files give you ALL the settings available ... in the MPASM syntax, of course !!! ... capito ???

¡Si Señor! I think I know that. So where can I find the correct syntax for MCS then??? Me parece qué esto es más difícil.

first of all CCPMX_OFF doesn't exist ... you've to CHOOSE your output Pin..

Hereunder, I highlighted the parameters I replaced by the ones I use normally (in comment) and see what happens (error msg) when the program is compiled by MCS.

Ah?
<img src="http://www.picbasic.co.uk/forum/attachment.php?attachmentid=2753&stc=1&d=121639034 1">
Oh!
<img src="http://www.picbasic.co.uk/forum/attachment.php?attachmentid=2754&stc=1&d=121639034 1">
Hmmmm...
<img src="http://www.picbasic.co.uk/forum/attachment.php?attachmentid=2755&stc=1&d=121639034 1">
As you can see, some "original" syntax from the MicroChip file won't be accepted in MCS. I understand MCS is not using "as is" all or part of the content of .INC files. Am I really wrong?