Hi, Savnik
did you verify the quiescent state collector voltage meets PIC input specs ???
I feel the problem in the Trans. hfe and not in the Pic ....
Alain
|
Hi, Savnik
did you verify the quiescent state collector voltage meets PIC input specs ???
I feel the problem in the Trans. hfe and not in the Pic ....
Alain
Last edited by Acetronics2; - 15th May 2008 at 10:55.
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
|
I use BF199 and not 2N3904(as show at picture).Originally Posted by Acetronics
The same circuit work on 16f876a.
I believe the problem is with the configurations
|
BF 199 has a "special" pinout ( b-e-c )... not the same as 2N3904 ... if my souvenirs are good ...
and hfe is far lower than the 3904 ... ( I've just measured ~ 50 @ 2.5 ma on some of mines )
the Only differences between 876 and 877 is the Port number ... as you do not use PORTD and PORTE ( I hope ...) , you can directly program the 877 with the 876 Hex !!!
Alain
Last edited by Acetronics2; - 15th May 2008 at 13:33.
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
|
The bf199 work with 16f876a.
I have spent many hours with no result.
|
I'm surprised it works with a 16F876a looking at the current ADCONx settings...
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Why;
Where i am wrong with ADCONX
|
Because you've got digital signals going into a port configured for analog input...
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks