|
BF 199 has a "special" pinout ( b-e-c )... not the same as 2N3904 ... if my souvenirs are good ...Originally Posted by savnik
and hfe is far lower than the 3904 ... ( I've just measured ~ 50 @ 2.5 ma on some of mines )
the Only differences between 876 and 877 is the Port number ... as you do not use PORTD and PORTE ( I hope ...) , you can directly program the 877 with the 876 Hex !!!
Alain
Last edited by Acetronics2; - 15th May 2008 at 12:33.
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
|
The bf199 work with 16f876a.
I have spent many hours with no result.
|
I'm surprised it works with a 16F876a looking at the current ADCONx settings...
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Why;
Where i am wrong with ADCONX
|
Because you've got digital signals going into a port configured for analog input...
|
with 16f876a i use ra0-ra1-ra2-ra5 as analog and ra3-ra4 as digital , and with those configurations work very well.But with 16f877a not.
|
Well, you didn't tell us that now did you?
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks