Barcode reader with PIC16f877A ?

[iugmoh]

I found the barcode reader specifications after a period time of searching
here is the link
http://s176338940.onlinehome.fr/pdf/IDICOD/2xxx.pdf

my barcode reader model is SSR-2110

but the manual is in franch i don't understand that

[skimask]

Push 1 once...write down the sequence of bits returned...push 1 again, compare the sequence to before
then push 2 once, write down that sequence, etc.etc. and so on...
What do you get on the display for a single press of the number 1 on the keyboard, one press, one release of that single key...not the numeric keypad, but the number 1 above the Q?

What did you come up with? Anything?

I found the barcode reader specifications after a period time of searching
here is the link
http://s176338940.onlinehome.fr/pdf/IDICOD/2xxx.pdf
my barcode reader model is SSR-2110
but the manual is in franch i don't understand that

Not going to read it, not going to attempt it, that's your job. Besides, I don't know french...

[mister_e]

By the datasheet, if your reader is SSR2110, it use the regular PS/2 interface.

There's few code example to read/decode/interface PS2 keyboard here

[skimask]

By the datasheet, if your reader is SSR2110, it use the regular PS/2 interface.

There's few code example to read/decode/interface PS2 keyboard here

There ya go...he knows french

Although that datasheet was sparse if it's anything...(even I could figure out some of those crazy words )

[iugmoh]

I make the interface between barcode reader and PIC16f877A successfully after many problems face me, yes it's working fine now.

thanks for all who help me

[bluebubble]

Could you please help me to finish my project on ps2 barcode reader? Can you please share your code?
i want to interface a ps2 barcode reader to PIC and want to read a barcode sticker and send the decoded data to RS232.