PIC 18F2455 USB code compiling problem

[skimask]

Hi. I got now stuck with USB stuff with PIC 18F2455.
Shortly, I want to apply a sine wave to PORTA.0, do ADC conversion
and send the data via USB to PC. Meanwhile, the PC interface is no ready as
I couldn't compile the code. As soon as the PC interface is ready I am planning make sure that I get data on the PC side and send them out and via
DAC reconstruct that sine wave.

Good luck doing much more than a good couple of khz with that...

My PBP version is 2.46 an I use MicroCode Studio 2.3.0.0. The necessary lines of 18F2455.INC file are commented as needed.

Get latest MPLAB (7.62?) and MCS 3...