Updating HPWM frequently, safe?

[mister_e]

can you try something because it's working really fine here... use another ADC channel, like GP4, or GP5.

[peu]

can you try something because it's working really fine here... use another ADC channel, like GP4, or GP5.

what do you mean by using another ADC? change the my test program to read in another port ?

thanks

[mister_e]

In your example you used ADCIN 1,pote to read GP1. Change it to ADCIN 5,pote. Sure you'll need to change your hardware and some regisers settings as well.

Next step will be to use a TIMER interrupt instead.

[peu]

In your example you used ADCIN 1,pote to read GP1. Change it to ADCIN 5,pote. Sure you'll need to change your hardware and some regisers settings as well.

Next step will be to use a TIMER interrupt instead.

I will do two things, 1st etch a pcb for the circuit and test it again, second try with a 16F628A

I let you know. thanks!

[peu]

made the etched pcb and only tried it with Mister_e hex file and it worked without flickerings. Im not sure if its supposed to smooth or in steps, I see steps.

More tests on monday. Thanks!!

[mister_e]

steps are normal with my HEX. but good news! and thanks to report your results. Sure many code before my last one will now work as designed.