Serin serout problem


Closed Thread
Results 1 to 40 of 337

Hybrid View

  1. #1
    Join Date
    Sep 2006
    Posts
    747


    Did you find this post helpful? Yes | No

    Default

    could I add a 10v voltage regulator for the RF transmitter to boost up the signal ? I am using the rentron 433mhz chips tws

  2. #2
    skimask's Avatar
    skimask Guest


    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by lerameur View Post
    could I add a 10v voltage regulator for the RF transmitter to boost up the signal ? I am using the rentron 433mhz chips tws
    If you're running the module at 5v now, you're good for about 500ft (that's what I've gotten at 9600 a few times, a few errors, but it still worked). and if you read the datasheet, you'll see that you have to run your data input line to the TX module at the same voltage range as your power input.

    I've ran that TX module at 2.5v before and gotten 100ft without troubles.

Similar Threads

  1. A Serial GLCD 128x64 Simple Project
    By Oldspring in forum Off Topic
    Replies: 0
    Last Post: - 8th March 2010, 20:58
  2. PIC16f877 code crosses boundary @800h
    By inventosrl in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 6th April 2009, 22:03
  3. serout and serin problem
    By nicolelawsc in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 11th April 2006, 19:44
  4. Replies: 11
    Last Post: - 13th July 2005, 19:26
  5. SerIn and SerOut
    By Dwayne in forum FAQ - Frequently Asked Questions
    Replies: 0
    Last Post: - 21st July 2004, 15:54

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts