mackrackit's ConnectOne example code

[kenruizal]

uhm..Sir what must be use in oscillator is it ok 4mhz or 8mhz?..what software do you use to load into pic18f4550 sir?...

[mackrackit]

The internal 8MHz oscillator is fine for this.
I use a PicKit2 to load the hex file onto the 4550.

[jellis00]

uhm..Sir what must be use in oscillator is it ok 4mhz or 8mhz?..what software do you use to load into pic18f4550 sir?...

I use an 8mhz external crystal with capacitors as shown in the schematic I will post with this. Like mackrackit, I also use the Pickit2 to load programs into my 18F4550.