PBP 2.60 upgrade and 18F4550

Printable View

- 30th November 2010, 02:52
Mike2545

PBP 2.60 upgrade and 18F4550

I just got the upgrade 2.60 and found the "AllDigital.pbp" include on another thread...works great!

I still am concerned about an error I get

Error[113] c:\pbp\18f4550.inc 21 : Symbol not previously defined (_FCMEN_OFF_1H)
Here is a simple code

Code:

' Example program to blink an LED connected to PORTB.0 about ' once a second INCLUDE "modedefs.bas" include "ALLDIGITAL.pbp" OSCCON =$60'72 'clock speed DEFINE OSC 4 LED VAR PORTB.0 ' Assign name "LED" to PORTB.0 mainloop: High LED ' Turn on LED connected to PORTB.0 Pause 500 ' Delay for .5 seconds Low LED ' Turn off LED connected to PORTB.0 Pause 500 ' Delay for .5 seconds Goto mainloop ' Go back to loop and blink LED forever End
- 30th November 2010, 03:22
mackrackit

I can not reproduce your error here. My guess is when you changed the *.inc to use the internal OSC something else got changed?

Post the configs .
- 30th November 2010, 03:38
Darrel Taylor
Several years ago, Microchip had erroneously called that bit _FCMEM_OFF_1H.
I think mister-e pointed it out to me.

You could ...
1. Rename your config bit to that.
  The bit is in your c:\pbp\18F4550.INC file
   
2. Correct the misspelled bit in Microchip's c:\program files\microchip\mpasm suite\P18F4550.inc file.
   
3. Update MPLAB and it should go away.
  http://www.microchip.com/stellent/id...&part=SW007002
If someone has a PBP version prior to 2.60 ...
Use this one instead ... (MPLAB V8.15a)
http://melabs.com/support/mplab_old_versions.htm
- 30th November 2010, 23:08
Mike2545
Quote:
Originally Posted by Darrel Taylor

Several years ago, Microchip had erroneously called that bit _FCMEM_OFF_1H.
I think mister-e pointed it out to me.

You could ...
Rename your config bit to that.
The bit is in your c:\pbp\18F4550.INC file
 

Correct the misspelled bit in Microchip's c:\program files\microchip\mpasm suite\P18F4550.inc file.
 

Update MPLAB and it should go away.
http://www.microchip.com/stellent/id...&part=SW007002

If someone has a PBP version prior to 2.60 ...
Use this one instead ... (MPLAB V8.15a)
http://melabs.com/support/mplab_old_versions.htm
Ok...But rename it _FCMEM_OFF_1H. with an M or N?
- 30th November 2010, 23:27
Mike2545

Quote:

Originally Posted by mackrackit

I can not reproduce your error here. My guess is when you changed the *.inc to use the internal OSC something else got changed?

Post the configs .

Code:

;**************************************************************** ;* 18F4550.INC * ;* * ;* By : Leonard Zerman, Jeff Schmoyer * ;* Notice : Copyright (c) 2009 microEngineering Labs, Inc. * ;* All Rights Reserved * ;* Date : 03/20/09 * ;* Version : 2.60 * ;* Notes : * ;**************************************************************** NOLIST ifdef PM_USED LIST "Error: PM does not support this device. Use MPASM." NOLIST else LIST LIST p = 18F4550, r = dec, w = -311, w = -230, f = inhx32 INCLUDE "P18F4550.INC" ; MPASM Header __CONFIG _CONFIG1L, _PLLDIV_5_1L & _CPUDIV_OSC1_PLL2_1L & _USBDIV_2_1L __CONFIG _CONFIG1H, _FOSC_HSPLL_HS_1H & _FCMEN_OFF_1H & _IESO_OFF_1H __CONFIG _CONFIG2L, _PWRT_OFF_2L & _BOR_ON_2L & _BORV_3_2L & _VREGEN_ON_2L __CONFIG _CONFIG2H, _WDT_ON_2H & _WDTPS_512_2H __CONFIG _CONFIG3H, _CCP2MX_ON_3H & _PBADEN_OFF_3H & _LPT1OSC_OFF_3H & _MCLRE_ON_3H __CONFIG _CONFIG4L, _STVREN_ON_4L & _LVP_OFF_4L & _ICPRT_OFF_4L & _XINST_OFF_4L NOLIST endif LIST EEPROM_START EQU 0F00000h BLOCK_SIZE EQU 32
- 30th November 2010, 23:34
Mike2545

Ok I changed them all to _FCMEN.

Now my led does not blink anymore...but the error is gone!
- 1st December 2010, 00:29
mackrackit

Quote:

Originally Posted by Mike2545

Ok I changed them all to _FCMEN.

That is what you had ??

Quote:

Error[113] c:\pbp\18f4550.inc 21 : Symbol not previously defined (_FCMEN_OFF_1H)

Quote:

Now my led does not blink anymore...but the error is gone!

You code appears that you want to use the internal OSC but the configs show an external.

Try this
_FOSC_INTOSC_HS_1H
in place of
_FOSC_HSPLL_HS_1H

You can go to the MPASM Suite in program files\microchip, look at the *.inc file there to see all of the config options. Do not modify that file.
- 1st December 2010, 01:41
Mike2545

Quote:

You code appears that you want to use the internal OSC but the configs show an external.

Try this
_FOSC_INTOSC_HS_1H
in place of
_FOSC_HSPLL_HS_1H

You can go to the MPASM Suite in program files\microchip, look at the *.inc file there to see all of the config options. Do not modify that file.

Thank a bunch...I changed the MPASM file back to FCMEM and made the PBP .INC to match, also set it to the internal OSC as you showed.:)
- 1st December 2010, 02:02
mackrackit

Are you up and running now?
- 1st December 2010, 02:58
Mike2545

Quote:

Originally Posted by mackrackit

Are you up and running now?

Yes, I am...I also put in _FOSC_INTOSCIO_EC_1H so I can use PortA.6 as a digital I/O
- 1st December 2010, 03:30
mackrackit

Cool!!! :D