View Full Version : mel PIC BASIC Pro
- How do I add a decimal point?
- HSERIN qualifier
- Timer0 Instant Interrupts Question
- Endless supply of 'syntax error's.
- calculator-like code entry with matrix keypad and display
- 18F452 and 8-bit LCD
- Drive relay between two times
- Very simple question (for someone)
- Need Single wire serial LCD converter example
- Can we suppress leading zero's in LCDOUT?
- PBP and phone text messaging
- Timer1 and Timer2 interrupts, Darrel Taylor
- 16f887 and hserin/out
- Multi DS18b20 Code help.
- Software PWM
- Software PWM using Timer1
- < We need hints and tips area of forum >
- Darrel Taylor - Instant Interrupts-Problem 16F877A
- master HSEROUT to mixed slaves
- 12F683 serout timing
- Can you teach a PIC to learn?
- compil usb PIC18F2450 problem
- How to latch an output for a pre-defined time
- Disable Watchdog timer?
- Hex In Serial out/in BMW I-Bus
- Pointers To Port Pins ?
- ELAPSED.PBP modification question
- conditional defines in PBP?
- missing high bits of word val
- only two
- Help with config fuse?
- 12C671 & Osccal register - I am confused
- Success! Are they 'words' or are they 'bytes'?
- Mplab headache lol
- DS1307 and a LED array, need ideas
- multi-tasking
- Interfacing Nokia 3310 Lcd Using PIC16f877a
- Frequency monitor and switcher... How to?
- Multiple "AND"'s in select case?
- Blink.Bas on 18f45k20 Newbie seeks working example.
- Xtal speed vs PIC power
- Infrared x PIC
- DT-Ints latency and other interrupt conciderations
- interrupts - basic info needed
- PIC KIT 2 writing problem ?
- Save config settings to hex file
- Serin timeout not working properly!
- Automation project need help
- Unable to set fuses on 16F676
- Proportional fan control. I suck at math!
- 16f877 to 18f4629 please
- DT_INTS-18 - problem with INT0
- 16f877 to 18f4620 need help
- Quick thoughts: DT Ints with encoders
- PULSIN & RCTIME resolution calculation
- Help with code please
- Slow code needs a tune up
- DT_INTS-18 and MPLAB
- Flow chart of MPPT
- Recording incoming logic signal duration, both edges - how to?
- Using both hardware int and Timer Int together?
- strange serout2 problem
- DT Ints work around for IOCA Register?
- serin2 w/f819?
- Simple USB Comms Problem
- PIC to GSM
- i need help please files library
- Behaviour of MPASMWIN in MCSP
- How to use LM34 to full range with PBP
- DT-INTs Interrupt handler question
- 16F181: can't wake up from sleep
- Adding PBPro code to an ASM file - how to?
- Variable table
- Output stays high
- Timer0 Reload based on ADC result
- Confused by "on Interrupt"
- ArrayWrite question
- How to read ID locations of PIC 18F4550??
- 12f629 serout,debug and serout2 timings
- PBP, ASM and LST files
- How to read / understand the config file P16fxxx.inc
- GLCD T6963c load and display picture
- strange rs232 data displayed
- OLIMEX ICD-2 in MicroCode Studio?
- USB hid maker help please.
- timer/counter questions
- 4 Bytes one button press
- Resolution integer math assistance?
- HighSpeed A/D and Baud Rates
- ISD4003 to TDA7052A
- Continuous Interrupts when using DT_INTS and an INCLUDE file
- Wireless using debug.
- I got error if we used pbp260 complier
- error worring pbp247
- Is this possible?
- Some Adviced Needed Please.
- LCD Display
- DT instant int error
- Calculating CRC for Modbus RTU
- pls help me verify my code not work, why???
- Clamping a value to 16bits.
- blink led 12f683
- Newbe how to save srtrings
- Need RFID PIC TAG with a LCD display
- using pbp pro with mplab and pickit2
- 18f4431; driving a stepper IN HARDWARE mode
- Problem with connection to SPI SRAM 23K256
- Random PBP
- Picbasic Pro compiler 2.60 error
- Pro upgrade clarification
- Beta software 4.32 for melabs u2 not working
- PWM signal
- Thermo 7 segments - little problem
- Bootloader
- RAM not reseting
- Array and IF - THEN
- I'm an idiot and I don't know why! - CCP1_INT
- Instant interrupts not working
- Experimenting with the PicBasic Pro Compiler
- Programming freezing
- I2CWRITE problem
- blinking problem with PIC16f887
- PIC16LF819 A/D problem
- Interrupts 101
- PULSOUT versus toggling a pin
- Best way to shut down HPWM channel?
- RS485 bus - starting probem
- 16F677 lcd troubles
- Pic16f887 vs ds1307
- Interrupt RPM and Taylors Elapsed time on 18F4620
- PIC18F4550 help please
- Pic and servo
- Internal vs. external osc for comms
- Setting PortB.7 as output on 16F627/8/48
- Is this code not initialising the LCD properly?
- DT-INTs What's legal in an INT handler?
- How long does PULSIN wait for a pulse?
- Low freq PWM problem
- DT_INTs with 16F690
- Mystery Compile Error
- 12F683 2 x PWM Outputs
- 144 LED Snake
- Multiple Variables - Pins
- Problem driving lcd from PIckit2 and 16F887
- Windows 7 / MPLab 8.2 and later
- Compiler Bug?
- Simple Blinking LED - WTF!!
- 16f505
- Beginer problems
- Configuration bits in a HEX file gone missing?
- diseqc rotor control
- Simple TMR1 application example needed
- changing osc on the fly
- Managing multiple channels driving triacs
- External Eprom
- DT-INTs Blinky Light question
- RTC module - Easypic5
- Serin2
- Blank Variable
- 16F1827 setup
- Please help to change pic on asm 12c509
- Incorrect adc channel bits generated
- Universal remote and Rs232
- Code programming error at 0000
- Is there a faster way to compare?
- Origin of Assembly Table
- Accurate milliseconds time measurements?
- PIC16f877A first 8 bytes destroyed after closing PicKit2 programmer app....
- config bits
- pic16f877 + max 7221
- lost programs/programs rolled back
- Read/Write Problem
- communication of pic 18f4520 and cell phone
- debug timeout issue 12F683
- Bootloader For 18F4520
- RC5 code for infrared receiver
- PIC16F676 RS232 baud rate
- Display Vdd
- EEPROM life
- Problems with SERIN2 using PIC16F689
- Need Help ON the SPI F-RAM....
- Can't read sequential addresses in external EEPROM
- Indexing Virtual Ports
- CAN bus with 18F258&MCP2551?
- How to index Port variable
- Strange Behaviour - Simple code+DT_INT+16F676
- To Generate Sine Wave Using PCPWM of PIC18F4331 (Issue)
- 2D Matrix Rotation
- MCS Plus ICD with 16F88x; again!
- Odd behavior if too many instructions
- EEPROM / interrupts
- INT2 anomaly in DT_INTS-18??
- Help/Explanation needed
- microcode studio and ql200 development board
- distance speed time
- Starting new project - Any ideas/suggestions?
- Lost Communications?
- Crownhill Needs Your Help
- RS232 to ethernet device
- Trying to get started w/ HPWM
- HSERIN for variable length string
- Scroll LCD?
- 16F636 Picbasic pro 2.60 / MPLAB 8.43 / Windows 7
- keypad
- PIC 16F877A circuit for stepper motor...
- TRIS setting for the DS1302
- Fast Data Logging
- Driving two stepper motors at the same time
- DT_Analog.pbp
- syntax error
- PICs can do more if use others than delays instructions
- How to make display move left and right
- Detecting a pulse
- MicroCode Studio and Target Processor
- Confused over A/D settings
- Why is life (coding) so difficult !
- Serin EEPROM Programmer
- Hserin
- 12H format setting for DS1307
- Windows 7 64 bit problem..can anyone help???
- PBP, 16F1827, FSR, and Error 113
- PBP migration from 16F88 to 16F1827
- Need help writing/reading from 16F819 internal EEPROM.
- Acquisition time in DT_Analog when oversampling?
- ADC or ADCIN "bias" problem?
- Using parity
- Serout -->>> serin
- ASM code
- interupt with 7-segment
- How to read write EEPROM on 12C671?
- read/write eeprom
- About Select Case
- Unable to pass a variable to LCDOUT without getting compile errors
- sending saved information
- I "lost it"
- picbasic pro and mplab IDE
- PIC Basic Code Understanding
- Elapsed_Demo.bas compilation errors
- Fast External Memory
- RX interrupt
- Problem with RAC_INT
- 12F683 ADcin = binary outcome!
- Parsing serial data
- Simultaneous programming of multiple pics - is it possible?
- Doubt with interrupt on change
- What is wrong with this division?
- WRITECODE, ERASECODE, and interrupts
- problem using GOSUB under interrupt
- 12F675 and LM35 coding issue
- ds 18b20 circuit.
Powered by vBulletin® Version 4.1.7 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.