View Full Version : mel PIC BASIC Pro
- Pauseus Doubt
- Newbie with an I2C question
- I2C Communication, PIC 16F616 to Honeywell humiditysensor HIH6131
- 16F627A PortA.4 trouble?
- 4 x PWM outputs
- 12F508 and Dallas 1820 not working
- PIC18f25k22 help with OSC configs
- PBP3 and MPLAB 8.83
- Strange IT behaviour
- pbp3 upgrade patches link
- I thought it was like riding a bike... Help please! 16f630 config
- Multiple 10bit adc on pic 16f887?
- Help with two lookup tables?
- Capture loop exit
- Reference a port pin from a variable
- DT INT error
- How to use DT_INT with 12F683
- 16F88 and MPLAB fuse setting problem
- Converting ASCII HEX digits to decimal...
- Interrupt problem
- 12F683 Logic Output Problem?
- Measuring Period of a pulse
- Can't set portb.0 low
- ARRAYWRITE to print acsi string
- MPPT system using PIC16f877a
- ADC problem on 18F46K22 device using all 28 ADC pins
- ASCII HEX Word to Decimal conversion....
- A new challenge (I'm in trouble again)
- I2C RTC Help
- help with how PIC stores values
- Code optomization ideas...(link)
- Trouble with LCD 2x8 and sequential display of values
- newbie trying to get it all going - PK3Err0045 connect to a target device
- 2 HPWM's at different frequencies?
- help about error messages
- Basic problem with interrupts and sleep command
- Determining how much RAM is available?
- Cant see where im going wrong with 16f1937
- Discovering devices on a bus
- PORTC.4 and C.5 not responding to inputs.
- PBP3 with PIC18F87K22 and variables
- "Bad bank number"?
- 16F877A and Gyro algorithm question
- pic 12f683 adc help please
- Program for controlling analog servo motor using PIC18F452
- Converting 10bit ADC result to 8 bit
- green arrow
- Possible PicBasic Pro ADC bug with 18F46k22
- Configure Internal Oscillator 16F628A
- Data statement and pbp3
- PIC16 Max Array Size
- I really need some help with PBP3
- Noise on input signal
- Bit Shift difference between PIC16 and PIC18 ???
- Accurate control of stepper motor
- Commands for serial LCD
- code for dc dc converter
- Help with Debug Command
- ProblemwithPWMfrequency
- PIC 12F683 and DS18B20 problem
- I need help on the compare module
- Need advice on config: PIC12F675 timer1 interrupt @overflow - GPIO.4 GPIO.5 no output
- Simple interrupt
- Building an I2C monitor ... but i think it is not Slave....
- Olimex PIC-MCP-USB
- Strange problem programming 16f88
- Effect of DT_INT14 on Serin2 or DebugIn
- Thermometer with MAX6675 and thermocouple
- Re: DT_Ints-18
- I am so confused!
- Bad 16f88
- 10bit A/d input
- LCD_COMMANDUS define
- Cruise Control
- math question
- 16F88 code problem.....I think
- SPI support
- snvt conversion
- Flowcode 5 Anyone?
- what is wrong in this code
- serial data ideas please
- (2) 10 Bit Inputs, Convert one to 8 bit and display both on LCD
- BlueSMiRF Gold and 16F877A
- 18f4550 ADC not responding
- Useless problem :)
- line truncate...again
- Index a bit through a portion of a port
- DT INTs which int to use??
- 16f628 LCD
- Silly question
- What the heck am I doing wrong?
- rotate bytes in array
- what is wrong am i doing in this code?
- pbp 3 and MPLAB X
- Measuring pulse width using ccp
- Struggling Newbie
- Oh Dear. My head is spinning. HPWM RGB LEDs What to choose?
- Weird behavior of my GSM Modem or Problem with my Code?
- SERIN2 = ok, HSERIN = no!
- pic18f24k22 & picbasic pro 2.45
- Help with Assembler Error
- Need help: 16f722a : Failed to blink on portc.3 - SOLVED
- Can someone help me get hpwm working on 18f24k22
- Sorting arrays
- PBP3 and MCSP
- Can someone show me how to set ccp3 to RC6 on pic 18f24k22
- Pulsin ir receiver and osc speeds
- Crashing 16F628 Code
- Help in Understanding the Math
- PIC32 32-bit MCUs Being Supported
- Multi-digit word variable to string
- Remote light control using internet. Need Advise
- Repeater ID and controller
- Powering and reset PIC16LF88 problem
- how to use a variable for pulsout command
- How do I check (or set) a group of consecutive bits within a byte?
- Urgent help need,,,some one please help program not compling....syntax erro
- pulsin is not getting the next part of wave
- VAR array compile issue
- 10bit ADC with offset on 16F88
- Another Silly Math Question!
- How to debug with MPLAB and PicKit3 with PicBasic Pro 3 - debugging
- condition not working
- Help With DS1337 Squarewave Output
- Two hopefully easy questions?
- Still Struggling with the formula!
- Help : Byte calculation question
- Why LCD won't work with RS connected to PortA.6 of 18F452?
- Trying to figure out how to compare to a value with decimal places
- What does the autorepeat number in the button command do?
- How to compare two temperatures
- Using Variables with PAUSE/PWM Commands
- Help with look up table
- Decimal PWM Cycle values?
- PortA.5 don't react
- 18f1320 icd
- Help ! Controlling 3-Phase AC Induction Motors Using the PIC18F4431
- Display graphical font using Nokia3310LCD
- Another 18F1320 ICD confusion
- read command of EEprom errors
- generating square wave
- ECIO with a PIC18F2525
- Transistor Affecting Timings?
- help with electronic question
- setting config fuses not working
- Shiftin / Shiftout bit pattern?
- HSERIN + interrupt
- HPWM Command and the "automatic selection of timer resources"
- Interrupt on PORTB.6
- Repeat .... UNTIL code
- I really, really, really need help with this code!!
- Led blink and interrupt
- PIC16F690 LCDOUT problem
- HPWM and variable 10-12khz outputs with a 48mhz osc possible?
- Problems with LCD display
- IR decoder Sony code Help
- CCP1 CCP2 Accuracy?
- pic16f628a issue
- Software based SPI For use on Nordic NRF24L01
- MPLAB X, PBP3(demo) and DT-Int
- help re pbp3 and picket 2 with 12f675
- PB3, which error is it ?
- Sleep mode not functionning
- 12f675 oscal calibration lost
- Pic887, New to programming, Clock.
- pulse counter 16f84a
- timer
- PBP3 what cause the resets ?
- pic16F628
- counter
- i need a help here to accomplish my tasks
- Why is this code not working(pwm on a 16f628a)
- asm to hex
- Dallas 3231
- Group - ungroup of commands
- Load needed for circuit to work ?
- Asm2hex
- Linear acceleration ramp
- Writecode/Erasecode/Readcode
- 16f1824 MCLR pin going low causes PIC to reset - what am I missing?
- pulse counter
- Math question
- Searching within array's
- SHIFTOUT syntax not understood - can't send any variables contents, while text is ok
- divide
- Which Communication protocol to use
- Problem with simple pic math
- Hserin Array Question
- Browned off by Brown Out [BOD]
- Two statements from assembly - trying to convert the code in PBasic Pro
- Time bomb
- Baud rate 115200 on PIC16F877A
- One of those days... config question
- "SLEEP xx" command with LFINTOSC (31 kHz)
- More help on LOOKUP tables please.
- Comparator and ADC PIC12F510
- Pulsin and ICD
- Persistence of vision wheel
- Servos and Plusin math
- ERROR IN 200QL Development Board
- HPWM Frequencies for Motor Control
- file association
- tables using PBP and asm command retlw
- LDP8806 RGB LED Light Strip
- help in pic Basic Pro "Break statement"
- Best way to read multiple temperatures?
- Auto Pilot
- help calculating word hex code from OBC value of IR signal
- 74hc595 help?
- INTCON Register - GIE set to ON or OFF- same result: T0IE still works ?!
- Redefinition of VAR errors in PIC14EXE.BAS AND PBPPIC14.RAM
- USBout problem
- IDC not working and U2 programmer issues
- Code not working. Analog readings on 2 pins
- Does 16F628a support debugging or not?
- Vdrive2
- Convert Rotary Encoder Code from 16F628A to 16F1825
- Serin and Serout problem
- PBP3 Compilation problem
- DMX512 SPEC OF data format of WAVEFORM
- RGB led driver ic lpd6803
- incPID Routine - Help Needed
- PBP3 Support HPWM on CCP3/CCP4 (16F1825)?
- How Driving Nokia 6610 LCD (Philips Controller's) with picbasic pro . Help Please
- how top make a library for a modual
- 50Khz PWM
- How to use array variable for shiftout command
- Frequency detection (audio)
- Some maths advise in PBP
- Issues with a feedback loop.
- My Head Hurts with Tables, Lookup, EXT etc etc
- Odd issue, hardware or MCLR
- Serin and usbout in the same code-problem?
- String of characters(array) to decimal value
- While loop on pwm module
- Maths help please
- PCPWM use and a few of the quirks
- LCDOUT problem
- DT interrupt problem
- Problem with 16F688 and using PORTA as digital inputs - I'm pulling my hair out!
- pbp pro compiler console application has stopped working
- Config/Connections for using 4-pin Oscillators
- Measuring temperature with a PIC
- Limit of PokeCode??
- Serial Communication for 16F84A
- Reverse in software PWM4 and PWM5 pins (PIC18F2431)
- ARRAYWRITE lenght
- Missing Operator ASM error
- How can I clean up my code?
- Full hardware flow control (EIA-232)
Powered by vBulletin® Version 4.1.7 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.