Instant interrupts not working

[mel4853]

Everything works except interrupts. What am I doing wrong? Maybe should kick back and have a few suds, this will make me so much smarter. Ha Ha.

Mike

[mel4853]

Forgot to say using a 12F683.

[Bruce]

How can you tell if it's actually working? All your routines are setting/clearing the same
pins as your interrupt handler!

[mel4853]

The handler only needs to pull in a relay as long as gpio.2 is low. Anyhow it works just fine now. Reread datasheet over and over and missed a couple registers that needed set.

[Bruce]

Glad you got it working, but which registers needed to be set?

[mel4853]

This is new file that works. Added option_reg.6=0,intcon.7=1 and ioc.2=1.