How to make a word as decimal in if then else statement

[jeroeni]

I am not sure... As I said... my english is not really good :P But if somebody can move it for me.. please

[mackrackit]

I am not sure... As I said... my english is not really good :P But if somebody can move it for me.. please

Are you using Pic Basic (PRO) ?

[jeroeni]

Yeah, I'm using the pro version.

[Acetronics2]

Your lines look to be an uncontrolled mix of Basic and C languages ...

So, it will be rather difficult to help you ...

BTW "Jeroen" ... that reminds me something...
what's your mother language ???

I'd bet Dutch ...

Alain

[jeroeni]

You're correct. I'm from Holland, a dutch guy...

[jeroeni]

I will explain what I am trying to do... maybe it helps... in bad english, lol

I've got 2 components, a DS1820 and a simple LED, both on other ports.
When the DS1820 gets on 21,2celcius for example, the LED must blink, on 21,2+ the LED stays on, on 21,2- the LED turns off. The code I've got to control the DS1820 is:

Above clear:
SYMBOL Convert      = $44 
SYMBOL RdScratchPad = $BE
SYMBOL SkipROM      = $CC
SYMBOL Graad        = 223    
SYMBOL DS1820       = PORTA.1
SYMBOL verwarming   = PORTA.6

DIM Temp            AS WORD
DIM Remain          AS BYTE
DIM Slope           AS BYTE
DIM BD1             AS BYTE   

--------

  OWRITE DS1820, 1, [SkipROM, Convert]
  OWRITE DS1820, 1, [SkipROM, RdScratchPad]
  OREAD  DS1820, 2, [Temp.LOWBYTE, Temp.HIGHBYTE, BD1, BD1, BD1, BD1, Remain, Slope] ',CRC]
 
  Temp = (((Temp >> 1) * 100) - 25) + (((Slope - Remain) * 100) / Slope)                
                                                                
  PRINT AT 1, 1, DEC Temp / 100, ".", DEC1 Temp / 10, Graad, "C  "

[edit]
by the way, verwarming is dutch... but doens't mather... it's just a symbol
[/edit]
But how can i control the LED with the code above? I used a IF then ELSE statement on Temp but Temp shows only symbols (not with DEC in front of it at the PRINT line, so not on LCD with that code)

[edit2]
When i use this, just for example what Temp do without DEC, I get the most funnyest symbols and icons on LCD

  PRINT AT 1, 1, Temp

Anyhow... I need to put it in a If then Else statement... to control the led
[/edit2]

[Acetronics2]

I will explain what I am trying to do... maybe it helps... in bad english, lol

I've got 2 components, a DS1820 and a simple LED, both on other ports.
When the DS1820 gets on 21,2celcius for example, the LED must blink, on 21,2+ the LED stays on, on 21,2- the LED turns off. The code I've got to control the DS1820 is:

Above clear:
SYMBOL Convert      = $44 
SYMBOL RdScratchPad= $BE
SYMBOL SkipROM      = $CC
SYMBOL Graad        = 223    
SYMBOL DS1820       = PORTA.1
SYMBOL verwarming   = PORTA.6
 
DIM Temp            AS WORD
DIM Remain          AS BYTE
DIM Slope           AS BYTE
DIM BD1             AS BYTE   
 
--------
 
  OWRITE DS1820, 1, [SkipROM, Convert]
  OWRITE DS1820, 1, [SkipROM, RdScratchPad]
  OREAD  DS1820, 2, [Temp.LOWBYTE, Temp.HIGHBYTE, BD1, BD1, BD1, BD1, Remain, Slope] ',CRC]
 
  Temp = (((Temp >> 1) * 100) - 25) + (((Slope - Remain) * 100) / Slope)                
 
  PRINT AT 1, 1, DEC Temp / 100, ".", DEC1 Temp / 10, Graad, "C  "

[edit]
by the way, verwarming is dutch... but doens't mather... it's just a symbol
[/edit]
But how can i control the LED with the code above? I used a IF then ELSE statement on Temp but Temp shows only symbols (not with DEC in front of it at the PRINT line, so not on LCD with that code)

Try to use PBP commands for the words I've put in RED ...

Will work much better ... ... IF YOU USE PICBASIC PRO, WHICH IS NOT THE CASE ...

Alain