DS18B20 using ROM ID

[ahmed_salah]

hi,
thanks for fast replay so u want me to replace my line with what u sent or to add it
i wnat to be sure from something

DS18B20 rom id $28, $D3, $60, $F6, $01, $00, $00, $41, $4E
so
FAM = $28
ID1 = $D3
ID2 = $60
ID2 = $F6
ID3 = $01
ID4 = $00
ID5 = $00
ID6 = $41
CRC = $4E


'

[Acetronics2]

.
.
.
ID2 = $60
ID2 = $F6
.
.
.

one of them is not the right one ... obviously

you have a 14 characters ID Number ... and Maxim chips only have ... a 12 Characters ID Number !!!

can't help you further ...

Alain

[ahmed_salah]

yes ,
you r right this all the code which i got when issue OWOUT DQ, 1, [$33] command
so this id include device manufacture and crc

[ahmed_salah]

this what i got when issue command OWOUT DQ, 1, [$33]
$28, $D3, $60, $F6, $01, $00, $00, $41

$28 is the FAM as i think
$41 is the CRC

[Acetronics2]

this what i got when issue command OWOUT DQ, 1, [$33]
$28, $D3, $60, $F6, $01, $00, $00, $41

$28 is the FAM as i think ... yes.
$41 is the CRC

... yes.

you had printed

 OWOut DQ, 1, [$55, $28,  $D3,  $60,  $F6,  $01,  $00,  $00,  $00, $41 ,$44]

3 times $00

instead of

 OWOut DQ, 1, [$55, $28,  $D3,  $60,  $F6,  $01,  $00,  $00,  $41 ,$44]

only 2 times $00 needed !!!

Alain

[ahmed_salah]

hi,
your are right it was my wrong i add extra 00 on id , now it working good ,
but when i change sensor or remove it i got 0.6 reading on LCD the first part of the program checks for presistance of specific ds18B20 and if it found complete the program and read temp else display no sensor , can u help in that

[ahmed_salah]

hi,
i update the code as attached i remove the initialization part and i got the same right reading
do u think it is not important to use initialization part