XBee, ZigBee etc


Closed Thread
Results 1 to 9 of 9

Hybrid View

  1. #1
    Join Date
    Jul 2005
    Location
    The Netherlands
    Posts
    40


    Did you find this post helpful? Yes | No

    Default XBee, ZIGBee

    Dear ZIGBee users,

    I order the complete development kit of Digi. This inclusive, XBee and XBee Pro modules, a XBee wall router and the gateway to Ethernet. I want to connect them to a PIC application with 140 nodes. End this week will a FAE of DIGI give my some course for setup the modules, show the firmware's versions etc.

    I will check this Post and will post my information to you.

    Best Regards,
    Gerben

  2. #2
    Join Date
    Nov 2003
    Location
    Greece
    Posts
    4,132


    Did you find this post helpful? Yes | No

    Default

    My experience with Digi is good in the part of people that try to help you, but their site lacks of examples to get you kick-started.

    So, if here on the forum are people testing and experimenting on these modules, I am sure that we will get more help from each other.

    By the way, which kit did you purchase? I got two kits of the new ones for the 868 devices for 99USD each. Then I found that the boards are the same as for the more expensive dev. kits for other devices!

    Ioannis

  3. #3
    thothefali's Avatar
    thothefali Guest


    Did you find this post helpful? Yes | No

    Default hi

    Quote Originally Posted by Gevo View Post
    Dear ZIGBee users,

    I order the complete development kit of Digi. This inclusive, XBee and XBee Pro modules, a XBee wall router and the gateway to Ethernet. I want to connect them to a PIC application with 140 nodes. End this week will a FAE of DIGI give my some course for setup the modules, show the firmware's versions etc.

    I will check this Post and will post my information to you.

    Best Regards,
    Gerben
    hi , i have 6 modules xbee series 2 , i configerd it the new fireware called ZB,i'm looking to create mesh network,my goal is to measure the rssi between the end device and the routers for localization ,do you have any idea about how to install the zigbees module or to change to series 1 is better?

Similar Threads

  1. ZigBee
    By atwoz in forum General
    Replies: 8
    Last Post: - 14th December 2012, 07:39
  2. RF Modules (Zigbee)
    By Chris Barron in forum mel PIC BASIC Pro
    Replies: 10
    Last Post: - 4th March 2010, 18:28
  3. PIC or xbee times out after Tx 504 bytes
    By archendekta in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 23rd November 2009, 08:45
  4. Student Project
    By aggie in forum mel PIC BASIC Pro
    Replies: 8
    Last Post: - 8th July 2006, 08:56
  5. zigbee 18lf4620
    By khoog in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 22nd March 2005, 01:10

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts