Writing custom characters to LCD display

[Ioannis]

It seems that you posted the same time as I did!

Now I understand what you want. No, you cannot do that the simple way of "blah blah blah".

You have to fetch each character on its own. Unless, the magician Darrel has another macro available to do the job!

Ioannis

[skimask]

You have to fetch each character on its own. Unless, the magician Darrel has another macro available to do the job!

I don't think even Darrel has the magical mystical powers to pull this one off...at least not with a standard parallel LCD.

[amindzo]

i want to write this sentence on LCD(this sentence is in Farsi language):
دما و رطوبت را وارد کنید
i have made the new fonts but i have a problem to show all of the sentence on LCD.how can i show all these custom fonts on LCD in 2 lines (the first 14 on first line and the next on second line).
i put دما in location 0,1 and 2 of RAM and show it on lcd and then make one space with lcdout" " and put the رطوبت in location 0,1,2,3,4 of RAM and when i wan to show it. it doesn't shows those 2 words, it's just shows the second word.( not completed),what's the problem?

[Ioannis]

When you put the second group of characters at locations 0,1,2,3 don't you overwrite the previous characters?

The problem as I understand is that you need many characters and you have only 8 available.

One solution would be to constantly reload the custom characters with the ones you want to display. But you cannot display them at the same time...

Ioannis

[amindzo]

yes, i need too many character and just 8 available so there is no way unfortunately.