Help 24LC 24C eeprom

[ikselsis]

How do you know you can't read with that code?
There's no output to anything! No LCD, no LEDs, no DEBUG output, no serial output, no nothing!

my problem is 100khz , 400khz and 1mhz eeprom, I read and write 100khz eeprom with 18f4620 , I'm not read and write 400khz and 1 mhz eeprom

[skimask]

my problem is 100khz , 400khz and 1mhz eeprom, I read and write 100khz eeprom with 18f4620 , I'm not read and write 400khz and 1 mhz eeprom

Well, again, can't see any code, so really can't tell if something else is messing with your eeprom.
What value pullups do you have on clock and data?

[ikselsis]

my pbp version is 2.46 become the problem here ?

[skimask]

my pbp version is 2.46 become the problem here ?

Hmmm...don't see that question above...
However, I do see a question asking something about pullup values...and something about showing some code.
I don't know...I could be seeing things again...