PIC18F452.INC not found

[Acetronics2]

Hi, Zaac

do you Use MPASM as an assembler ??? the Error file shows some MCS ...

Alain

[skimask]

do you Use MPASM as an assembler ???

Doesn't that kick out a totally different error? Something like "18F not supported with PM" or something like that?

[Acetronics2]

Hi, Ski

You're right ... there's a window appearing in MCS if wrong assembler selected.

the worst is the program compiles and assembles fine here ...


Isaac,

check : VIEW\Compile and Program options\ assembler tab and verify if good locations given.

Alain

[Darrel Taylor]

Try this Isaac,

http://www.picbasic.co.uk/forum/show...5&postcount=11
<br>

[isaac]

Thank All

i have got it to compile now.
Darrel Taylor hit the nail on the head .
I pointed to it as he describe below andit worked
================================================== ====
In MCS, go to the View | Compile and Program Options | Assembler Tab

Click the Find Manually ... button and point it to
C:\program files\microchip\mpasm suite
===========================================
i thinkit was trying to use the mpasm that came with Microcode studio

Thanks a million
Isaac