Writing internal calibration value

[ruijc]

Thanks mackrackit,

With the link i found that i need to use the line:

POKECODE @$3FF, $78 ( where $78 should be replaced with my setting )

When using this with my pbp i get alot of error lines like :
[218] Address limit of 3FFh Exceeded

Did i miss something ?

[mackrackit]

Thanks mackrackit,

With the link i found that i need to use the line:

POKECODE @$3FF, $78 ( where $78 should be replaced with my setting )

When using this with my pbp i get alot of error lines like :
[218] Address limit of 3FFh Exceeded

Did i miss something ?

That should work.
What value do you have when you read 3FF?

[ruijc]

the pic's original value is 74.

[Bruce]

POKECODE @$3FF, $74 has to be the very last line of code. If you try placing this before
anything else PBP thinks you're out of code space.

[ruijc]

Thanks Bruce,

I believe you are right !

It makes perfect sense !

This line should be the last line ( i did actually placed on top next with the settings ).

Will try this when i get home.

Thanks