Anyone use HIDMaker FS?

[Darrel Taylor]

I'm sure it works great. But $599.95 ????

You can do the same thing for FREE with EasyHID, or the melabs demos.
<br>

[TonyA]

I'm sure it works great. But $599.95 ????

You can do the same thing for FREE with EasyHID, or the melabs demos.
<br>

Hi,

Have you ever used EasyHid? I've read some posts that describe it as not providing enough info to get the job done, at least for a beginner.

From what I understand if you wanted to modify the melabs demos you'd also have to modify the .asm support files? (I assumed you would need to know some assembly in order to do that.)

If it's (HIDMaker) as easy as the say, it seems like the cost would be recouped in time/frustration saved. (At least that's what it seems like initially, as I investigate.)

[mister_e]

i use Mecanique EasyHID. Not much.

It do everything you need to start.

http://www.mecanique.co.uk/products/usb/easyhid.html

Well, if it's not enough, you could still break the bank and waste that 600USD. But honnestly, i don't see ANY advantages... unless you don't want to scratch your head a little bit.

Follow the USBDemo and Darrel's instant interrupt thread. Should be something to read and try first.

It's still your money so far

[Darrel Taylor]

You'll have to excuse mister_e's modesty.

Everything you need to start can be found here...

USBDemo, something to learn USB a little bit
http://www.picbasic.co.uk/forum/showthread.php?t=5418
<br>

[mister_e]

well... thanks and sorry.. you know why