mouse demo program PIC18F4550

[SterlingY]

I found the settings on another post, but still have no luck. Here's what I got: see attached.

The only thing I don't have ON as in the other posting is WRTB. I'm afriad to protect the boot table, for fear I'll never be able to change it.

Thoughts, maybe it is a wiring issue.

-Sterling

[skimask]

I found the settings on another post, but still have no luck. Here's what I got: see attached.

The only thing I don't have ON as in the other posting is WRTB. I'm afriad to protect the boot table, for fear I'll never be able to change it.

Thoughts, maybe it is a wiring issue.

-Sterling

So, you're running the PIC at 20mhz, and the code is defined as running at 48mhz and yet the PLL's are configured for a 20mhz oscillator.
Nope...no idea what the problem is...

[SterlingY]

According to this thread: http://www.picbasic.co.uk/forum/show...85&postcount=4

This is how the code and chip should be configured.

It says: DEFINE OSC 48 ' 20MHz crystal with HSPLL enabled = 48MHz

-Sterling

[SterlingY]

Problem solved!!!!

The config settings on the other thread are correct. I had removed a capacitor and forgotten. That's what happens when you spend 8 hours on one thing.

Cheers,

Sterling