Android Basic Alternative

[spcw1234]

Use this line

AStream.InitializePrefix(serial1.InputStream, False, serial1.OutputStream, "AStream")

I finally found time this weekend to play with this some more and did get it working! Thanks for your help Tobias!

[spcw1234]

My very simple working code:

OSCCON=%01110000            ' SET TO 8 MHZ internal oscillator
DEFINE OSC 08               ' 8MHZ clock speed 
DEFINE HSER_BAUD  9600      ' Set baud rate
DEFINE HSER_RCSTA 90h
DEFINE HSER_CLROERR 1       ' Clear overrun error upon
DEFINE HSER_TXSTA 24h       ' Set transmit status and control register
DEFINE HSER_SPBRG 51        ' 9600 Bauds

RPM      var word
SPEED    var word
TPS      var byte
volts    var byte
adc1     var word
adc2     var word
prefix1  var byte    
prefix2  var byte
prefix3  var byte
prefix4  var byte

rpm     = 3800
speed   = 60
tps     = 10
volts   = 122
ADC1    = 512
ADC2    = 200
Prefix1 = 22  
Prefix2 = 0
Prefix3 = 0
Prefix4 = 0

main:
  pause 500
  hserout [Prefix1,Prefix2,Prefix3,Prefix4,dec5 rpm, dec3 speed, dec3 TPS, dec3 volts, dec4 adc1, dec4 adc2] 
goto main  

end

Sub Process_Globals
	Dim AStream As AsyncStreams	
	Dim Incoming As String
	Dim RPM As Int 
	Dim SPEED As Int 
	Dim TPS	As Double 
	Dim VOLTS As Int 
	Dim ADC1 As Int
	Dim ADC2 As Int 
End Sub

Sub Activity_Create(FirstTime As Boolean)
	Activity.LoadLayout("2")
	  If AStream.IsInitialized = False Then	
		AStream.InitializePrefix(Main.Serial1.InputStream, False, Main.Serial1.OutputStream, "AStream") 
	  End If
	Update_Display 
End Sub

Sub AStream_NewData (Buffer() As Byte)
	Log( BytesToString(Buffer, 0, Buffer.Length, "ISO8859_1"))
	Incoming = BytesToString(Buffer, 0, Buffer.Length, "ISO8859_1")
	
	RPM   = (Incoming.SubString2(0,5))
	SPEED = (Incoming.SubString2(5,8))
	TPS   = (Incoming.SubString2(8,11))
	VOLTS = (Incoming.SubString2(11,14))	
	ADC1  = (Incoming.SubString2(14,18))
	ADC2  = (Incoming.SubString2(18,22))

	Update_Display 
End Sub

[Demon]

Thanks for the working example. Can you explain the complete setup? That HSEROUT goes to what, an external bluetooth module?

This would make an excellent article with some narrative explaining what is going on, hardware/software requirements, etc.

Robert

[spcw1234]

The hserout goes to a RN42 bluetooth modem. Could be done with debug as shown in an earlier post. Once paired it isn't much different than any other serial connection, but the Android side of things takes some time to wrap your head around. The prefix is a pain, but works very well once working. It is basically just a 32 bit header detailing the number of bytes in the serial string.

[Demon]

Can we control to what device we want to talk to via that header?

Let's say to transmit one thing to my cell phone and another to my daughter's?

[spcw1234]

No, what you transmit to is strictly set by pairing the 2 devices which is not part of this code. I don't think you can pair more than 2 devices. The header is just for validation of the data. The data received flag isn't raised until all data is received, without it the flag is raised as soon as data appears, and then you have to manually put the bytes into a string and wait until they all arrive.

[Demon]

No, what you transmit to is strictly set by pairing the 2 devices which is not part of this code. I don't think you can pair more than 2 devices. The header is just for validation of the data. The data received flag isn't raised until all data is received, without it the flag is raised as soon as data appears, and then you have to manually put the bytes into a string and wait until they all arrive.

So let's say I have 2 garage door openers, I could pair with the phone, send that header and data defining if PIC should activate relay for left or right door button and then unpair phone?

Just making sure I can get 2 phones to be able to open either door (project #1).

Robert

[Tobias]

Good to hear you got it sorted out.

I have to say if you are turning 3800 at 60MPH, you might need to look at changing rear gears

I finally found time this weekend to play with this some more and did get it working! Thanks for your help Tobias!

[Charlie]

Just thought I should bring this thread up to date... In the end I gave up on the alternatives, and I broke down and bought Basic4Android since it seems to be the most mature thing out there. If anybody is interested in a 50% off coupon code, you can use this " dqqshs " You go to their purchase page and hit the "Plimus" button, then enter the code.

[Demon]

I'm debating which version to get, Enterprise $99 at 50%?

Bang for buck looks good.

Which are you getting?

(Just checking so I can copy your code )

Robert