Reverse in software PWM4 and PWM5 pins (PIC18F2431)

[HenrikOlsson]

Hi,
Well, you have the HPOL and LPOL bits in CONFIG3 (see section 18.11) but they control the polarity of all the "high" and "low" side signals at once. So, as far as I can see there is no way of doing this in software, I think you need to do a little hack on the PCB.

/Henrik.

[pxidr84]

Hi,
Well, you have the HPOL and LPOL bits in CONFIG3 (see section 18.11) but they control the polarity of all the "high" and "low" side signals at once. So, as far as I can see there is no way of doing this in software, I think you need to do a little hack on the PCB.

/Henrik.

Thanks, I see that, so I will do a little modification on the PCB (sadly).