Quote Originally Posted by dhouston View Post
3. I dropped my intent to make the shield work with 5V and 3.3V because it was just to complicated with all the SPI lines on the other modules. However, with the Mini Socket iWiFi, we are only dealing with two inputs and one output. The way I prefer to handle this is with a transistor and two resistors for each line. You can see example circuits in FIG 15 of AN213.
Other Dave,
I appreciate your referral to this app note...it has a lot of good ideas in it. However, for the level shifting I have to do between the 5V logic on the PIC MCU and the 3.3v logic on the MiniSocket iWiFi module, I am going to give the Sparkfun device a try (see http://www.sparkfun.com/products/8745 ). It is low cost and gives me enough channels to handle the problem. Have you or anyone had any experience with it?