PICBasic newbie problem

[krohtech]

ASM
    CONFIG FOSC=HS    ; Use HS oscillator (20MHZ here)
    CONFIG BOR=OFF    ; Brown out reset ON  
    CONFIG WDT=ON    ; Watch dog timer ON
    CONFIG LVP=OFF   ; Low Voltage programming OFF
    CONFIG DEBUG=OFF ; Background debugger OFF
    ENDASM

I never did get this method to work. I use this method of setting the fuses on my 18F2410:

@       __CONFIG    _CONFIG1H, _OSC_INTIO67_1H
@       __CONFIG    _CONFIG2H, _WDT_ON_2H & _WDTPS_512_2H
@       __CONFIG    _CONFIG3H, _MCLRE_OFF_3H & _PBADEN_OFF_3H 
@       __CONFIG    _CONFIG4L, _LVP_OFF_4L & _XINST_OFF_4L