Hey Guys.
In the PBP manual there is a circuit diagram with a 10K resistor (pull-up)
connected to +5 and A4. Also some of the portA pins require
pull-ups, though don't recall which ones. I'd have to read the data
sheets for both the 16F84(this is the PIC in the example drawn) and the
16F88. More than likely there are going to be differences between
the two.

Once again, thanks guys for getting this LCD working. The F88s are slick.
Bootloader and 4K of code space all in a small 18 pin DIP.

Gordon