A half mistake. I learn from my error.Originally Posted by mister_e
For the record, i was refering to post #7
But i have to agree, many pin have an open-drain output on this pin.
|
A half mistake. I learn from my error.For the record
But i have to agree, many pin have an open-drain output on this pin.
|
As everybody should do, there's no problem at all.
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Everyday
Mistakes are why I learn something everyday
If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
.
Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
.
There simply is no "Happy Spam" If you do it you will disappear from this forum.
|
Hey Guys.
In the PBP manual there is a circuit diagram with a 10K resistor (pull-up)
connected to +5 and A4. Also some of the portA pins require
pull-ups, though don't recall which ones. I'd have to read the data
sheets for both the 16F84(this is the PIC in the example drawn) and the
16F88. More than likely there are going to be differences between
the two.
Once again, thanks guys for getting this LCD working. The F88s are slick.
Bootloader and 4K of code space all in a small 18 pin DIP.
Gordon
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks