I'm not "new" here; I just don't get into every little thing that's posted.
Data sheets and manuals are not written "by engineers for engineers"; that's nonsense. They are written for those knowledgeable in the discipline. If you have not taken the time to make yourself knowledgeable then it's on you. If you don't understand the information in the manual then get a basic book on electronics and educate yourself. There is nothing in the manual that anyone with a basic understanding of electronics wouldn't understand.
Contrary to what (it appears) many people on this forum think, electronics and microcontroller programming isn't some "plug 'n play" hobby. It requires a great deal of time to gain the knowledge to succeed. Yes, I am knowledgeable in the field. This didn't happen by accident; I've spent a great deal of time reading books, manuals and data sheets. I began with the fundamentals and worked up from there. Once you spend the time you'll begin to see that the "unusual new ideas" are neither "unusual" or "new" and are in fact rubbish from people that haven't spent the time up front to know what they are talking about.
I feel so sorry for tech support guys; I really do.
Mike Tripoli
P.S. Your little "quote" about Communism is complete crap.
Reply With Quote
Bookmarks