Why would problems occur, if you do not draw too much current ??? just check the voltage vs current datas ...
I often use output pins to power TL431s as voltage refs ... absolutely no difference from powering a simple LED ...
Alain
|
Re: Using output pin to power peripherals; Op-amp, voltage reference, voltage divider
Why would problems occur, if you do not draw too much current ??? just check the voltage vs current datas ...
I often use output pins to power TL431s as voltage refs ... absolutely no difference from powering a simple LED ...
Alain
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks