Hello Martin,

I just scanned the Bosch datasheet. Their sensor is very similar to the Intersema MS5561C. The coding is more complex for the Bosch and the package will be tough to prototype I reckon. Have a look at the Intersema MS5540C. It is an easy package for hand solder prototyping. The Intersema range converts in about 35 mSecs. The Bosch unit at 7.5 mS has advantages in this area. Unless you need the speed I would have a go at the Intersema.

The MS5540C is under $20 qty 1 at Digikey which is where I get them.

HTH
BrianT