PWM 'channels ...what's that all about then!

[aratti]

using the PWM command to vary the DC level on an output pin (using a LPF). I need to do this on six output (ie differeing PWM duty cycles on six different oupt pins)

Hank, using a pic with one CCP channel you can obtain as many PWM outs as you like, simply with an extra logic gate. See the schematic attached, it should explain by itself how it works.

Al.

[HankMcSpank]

Thanks for the explanation Melanie...I only want six becuase some idiot went & designed a guitar with six strings (I reckon every instrument should be created using the banjo model ....then it's be a doddle to use my humble PIC16F690 with it!)

aratti, thanks for the info...i'm not sure that'll be helpful in my scenario, as I need to vary the PWM duty cycle per pin output (whereas that schematic uses one common PIC PWM output stream & then just 'ands' it to suit)

[Bruce]

The 18F2331/2341/4331/4431 have a lot of PWM outputs.

See this thread http://www.picbasic.co.uk/forum/showthread.php?t=7095

[Bruce]

No edit, bummer..;o}

The 18F2331/2341/4331/4431 have a lot of PWM outputs.

Should be; The 18F2331/2431/4331/4431 have a lot of PWM outputs.