Gpio ? Trisio ?

Hi there,

I'm kind of stuck on this. A few weeks ago i made a RC5 IR to 10F202 receiver. All
worked fine. I decided that i need to store some counter values in eeprom, since the
10F does not have that, i decided to go with the 12F519.

I was used to set the IO functionality for the 10F trough the GPIO and TRISIO registers:

Code:

---

TRISIO = %00001000          'GPIO.3 = input only
GPIO    = %00000000          'All low

---

In the 12F519 datasheet is says the tri-state register is called TRISGPIO and the GPIO register is called GPIO.

When i use TRISGPIO i get an syntax error, using TRIS or TRISIO also.
When i set a pin like: SDA VAR GPIO.1 i get an error : undefined symbol 'GPIO'

What am i missing ?

I think i figured it out, but i'm still confused ...

When i compile :

Code:

---

TRISB  = %00111100                                      'Set TRIS register input's & output's
PORTB  = %00000000                                      'Set all digital low

SDA    var PORTB.0                                      'I2C DATA pin
SCL    var PORTB.1                                      'I2C CLOCK pin

---

It compiles, without any errors !
How ?

Change your PIC type to 12F519 in the menu above the program.

______________________

Thought of that, checked just yet it is 12F519 ... So that's not it ....

Hi,

The truth is always Here :

Code:

---

'****************************************************************
'*  12F519.BAS                                                  *
'*                                                              *
'*  By        : Leonard Zerman, Jeff Schmoyer                  *
'*  Notice    : Copyright (c) 2007 microEngineering Labs, Inc.  *
'*              All Rights Reserved                            *
'*  Date      : 06/26/07                                        *
'*  Version  : 2.50                                            *
'*  Notes    :                                                *
'****************************************************************

BANK0  $0007, $001F
BANK1  $0030, $003F
EEPROM  $0400, $043F
LIBRARY "PBPPIC12"
DEFINE  CODE_SIZE 400h

        include "PIC12EXT.BAS"

TRISB        VAR        BYTE BANK0 SYSTEM        ' TRISB shadow register

PORTL  VAR    PORTB
PORTH  VAR    PORTB
TRISL  VAR    TRISB
TRISH  VAR    TRISB

        include "PBPPIC12.RAM"

'*----------------------* EOF 12F519.BAS *----------------------*

---

Have a look to the "1xYzzz".bas file in your PBP Directory. ( 1xYzzz = 12F519, here )

You can modify it or add Other Aliases ... at your own risks !

for 10F :

Code:

---

'****************************************************************
'*  10F206.BAS                                                  *
'*                                                              *
'*  By        : Leonard Zerman, Jeff Schmoyer                  *
'*  Notice    : Copyright (c) 2004 microEngineering Labs, Inc.  *
'*              All Rights Reserved                            *
'*  Date      : 06/04/04                                        *
'*  Version  : 2.46                                            *
'*  Notes    :                                                *
'****************************************************************

BANK0  $0008, $001F
LIBRARY "PBPPIC12"
DEFINE  CODE_SIZE 200h

        include "PIC12EXT.BAS"

TRISIO        VAR        BYTE BANK0 SYSTEM        ' TRISIO shadow register

PORTL  VAR    GPIO
PORTH  VAR    GPIO
TRISL  VAR    TRISIO
TRISH  VAR    TRISIO

        include "PBPPIC12.RAM"

'*----------------------* EOF 10F206.BAS *----------------------*

---

Alain

You're so right !

Thanks, all clear now !