Lookup

Anyone familiar with LookUp command?
here is what my problem is. I have large data to look up. About 200 points of data.
Here is a small portion of it.

LookUp adval["55,55.2,55.4,55.6,55.8,56,56.2,56.4,56.6,56.8,57, 57.2,57.4
,57.6,57.8,58,58.2,58.4,58.6,58.8,59,59.2,59.4,59. 6,59.8,60,60.2,60.4,60.6,60.8,61,61.2,61.4,61.6,61 .8,62,62.2,62.4,62.6,62.8,63,63.2,63.4,63.6,63.8"],point

Now the problem is that it compiles fine if I have only 1 line of data like this.

LookUp adval,["55,55.2,55.4,55.6,55.8,56,56.2,56.4,56.6"],point

How can I keep continuing to the next line and so forth like the first example from above?

DO something Like This
LookUp adval[55,55.2,55.4,55.6,55.8,56,56.2,56.4,56.6,56.8,57,5 7.2,57.4,_
63.4,63.6,63.8],point

Still giving an error message.
says it is expecting "]"

seem like the lookup table cannot contain any decimel points. Once I took of the decimals, it errors disappeared.

Now, how can replace the decimal back into the lcdout command

550 is suppose to be 55.0

And

2000 is 200.0

never us any LOOKUP but

LookUp adval,["55,55.2,55.4,55.6",_
"55.8,56,56.2,56.4,56.6,56.8,57",_
"57.2,57.4,57.6,57.8,58,58.2,58.4,58.6,58.8,59,59. 2",_
"59.4,59.6,59.8,60,60.2,60.4,60.6,60.8,61,61.2,61. 4",_
"61.6,61.8,62,62.2,62.4,62.6,62.8,63,63.2,63.4,63. 6,63.8"],point

dont return any errors


let me know

Hi Actionplus,

It seems like you discovered that PBP cannot handle decimal numbers.

If you want to diplay your data with a decimal you could write ...

LCDOUT "Data = ", DEC data/10, ".", DEC1 data

.... or, if you want a little more control over each digit .....

LCDOUT "Data = ", DEC1 data DIG 4, DEC1 data DIG 3, DEC1 data DIG 2, DEC1 data DIG 1, ".", DEC1 data DIG 0

/Ingvar