Printable View
How do you make a code work like this:
When I push a button a timer starts and when I push it again it stops and make that time into a variabel. So I can use that time in my program something like this:
Code:...
...
HIGH PORTB.1
PAUSE "The Time"
LOW PORTB.1
...
...
How accurate do you need it and how long will the timer run at a time?
If you need to do other things while the timer is running then an interrupt will be needed. Search the forum for timers.
If you want something quick and dirty and nothing else will be happening when the time is collected this idea might work for you.
When the button is pushed goto a time loop and stay there until the button is pushed again.
While in that loop have a pause for a certain amount of time . Count to a variable each time (T=T+1) through the loop. When you are out of the loop read the variable.
Say the pause is 100 ms and it goes through the loop 10 times. that would equal 1 second plus execution time.
Both includes a LCD wich make it harder to understand the code :/
xobx, Just declare a word size variable and then pass it as the variable to the pause statement, like this:
time var word 'time in milliseconds
HIGH PORTB.1
PAUSE time
LOW PORTB.1
Dave Purola,
N8NTA
maybe something like this? (§ indicates new line) §loop: §button portb.0,1,255,0,but1,0,loop §gettime: §pause 100 §thetime = thetime + 1 §button portb.0,1,255,0,but1,0,gettime §flash: §for blink = 1 to thetime §high portb.1 §pause 100 §next blink §low portb.1 §goto loop
max number of pauses will be 65535. so with pause 100 max time will be 6553.5 seconds or just under 110 mins. for longer times use a longer pause, for better accuracy use a smaller pause. it would also need a line in gettime to make sure it doesn't overflow.
This will be more readable:
Code:loop:
button portb.0,1,255,0,but1,0,loop
gettime:
pause 100
thetime = thetime + 1
button portb.0,1,255,0,but1,0,gettime
flash:
for blink = 1 to thetime
high portb.1
pause 100
next blink
low portb.1
goto loop
Ok but I doesnt understand this line :/
button portb.0,1,255,0,but1,0,loop
PBP Pro manual, page 47.
All parameters explained
Ioannis