config

Can anyone tell me why this does not work?

I started with "@ DEVICE MCLRE_OFF, INTRC_OSC, WDT_OFF, LVP_OFF, BOD_OFF, PWRT_ON, PROTECT_OFF" in PBP2.50 and need to know the proper syntax for PBP3?

#config
__config _MCLR_OFF & _INTRC_OSC & _PROTECT_ON & _WDT_OFF & _BOD_OFF & _PWRT_OFF
#endconfig

Thanks

Roger

Post all your code and model of PIC.

What errors do you get? How does it "not work"?

Robert

Quote:

---

Originally Posted by Demon

Post all your code and model of PIC.

What errors do you get? How does it "not work"?

Robert

---

I am using a 16f628a. I was unable to compile because of undefined symbol "INTRC_OSC"

this seems to work
#config
__config _INTOSC_OSC_NOCLKOUT & _WDT_OFF & _MCLRE_OFF & _LVP_OFF & _CP_ON
#endconfig



I was having problems with the "INTOSC_OSC_NOCLKOUT" in PBP2.5 this was "INTRC_OSC". I would like to see a list of all of these changes if anyone know where to find them?

Thank you very much for your reply Robert!

Roger

Have you read this?

http://www.picbasic.co.uk/forum/showthread.php?t=543

Did you change to MPASM instead of PM?

Robert

I just received my new PBP3 and this documents seems to say that the PM assembler is no longer supported?

http://pbp3.com/downloads/Migrating%...0to%20PBP3.pdf

Please take a look and tell me I am wrong. I have used PBP for many years and change is not my favorite thing:)

Thanks for all of your help!

Roger

PM is now "extinct".

You have to download MPLAB X (I think), and then point to MPASM.

You don't have to use MPLAB, you only need the new assembler.

Robert


Edit:
http://www.picbasic.co.uk/forum/showthread.php?t=18520

Now I am really confused! I will sleep maybe it will all make sense in the moring:confused:

Thank You

Roger

Yeah, I can see why. I think that thread is when you want to use MPLAB.

Here's what I do for PBP 2.6:

- install MPLAB.
- install PBP.
- install Microcode Studio.
- in MCS, point to PBP and MPASM.

Unless v3 has a major change in the way things work, the same should work.

Hopefully someone with v3 can chime in.

Robert

Make a separate directory for pbp3 from earlier versions so you can use both.

Thank You to everyone!

Roger

If you go into the "DEVICE_REFERENCE" folder of your PBP3 install directory you will find a bunch of files *.INFO. Find the file that relates to your PIC and open it to find a complete list of all the config options with descriptions and an example of how to use the settings in PBP3, e.g for PIC16F1509

Quote:

---

; Available __CONFIG labels for PIC16F1509:
;
;CONFIG1 Options
;
; Oscillator Selection Bits
; _FOSC_ECH ;ECH, External Clock, High Power Mode (4-20 MHz): device clock supplied to CLKIN pins
; _FOSC_ECM ;ECM, External Clock, Medium Power Mode (0.5-4 MHz): device clock supplied to CLKIN pins
; _FOSC_ECL ;ECL, External Clock, Low Power Mode (0-0.5 MHz): device clock supplied to CLKIN pins
; _FOSC_INTOSC ;INTOSC oscillator: I/O function on CLKIN pin
; _FOSC_EXTRC ;EXTRC oscillator: External RC circuit connected to CLKIN pin
; _FOSC_HS ;HS Oscillator, High-speed crystal/resonator connected between OSC1 and OSC2 pins
; _FOSC_XT ;XT Oscillator, Crystal/resonator connected between OSC1 and OSC2 pins
; _FOSC_LP ;LP Oscillator, Low-power crystal connected between OSC1 and OSC2 pins

---

are the config options for the oscillator. When you install PBP3 it has the option of installing the correct assembler if not already installed.

That is exactly the file I was trying to find!

Thank You!

Roger

Your most welcome!