Originally Posted by
N6VMO_
My project is to read in a string of 19 characters from a GPS's serial port using HSERIN. Then using
LOOKUP to parse the 10th and 11th characters in the TIME string and act upon the results.
I have the HSERIN working at 9600baud and can display the received string on the LCD. But, I
can't seem to get the LOOKUP syntax correct. Even the examples in the MicroCode Studio and PBP
manual do not compile correctly and it is very frustrating.
Here is my program:
:o
DEFINE HSER_TXSTA 24H
DEFINE HSER_RCSTA 90H
DEFINE HSER_BAUD 9600
DEFINE HSER_SPBRG 25
TIME VAR BYTE(19)
PAUSE 2000 'FOR LCD
LCDOUT $FE,$1 'CLEAR LCD
PAUSE 200
LCDOUT "TEST HSERIN" 'DISPLAY "TEST HSERIN" ON LCD LINE 1
PAUSE 1000
GOSUB CURHOME2 'MOVE LCD CURSOR TO LINE 2
MOREHSER:
HSERIN [WAIT("C708")] ' WAIT FOR "C708"
HSERIN [STR TIME\19]
LOOKUP 10,[TIME],B1 ' FIND 10TH CHARACTER IN THE 'TIME' STRING
LCDOUT B1 ' DISPLAY 10TH CHARACTER ON LCD
LCDOUT STR TIME\19
GOSUB CURHOME2 'LINE 2
GOTO MOREHSER
CURHOME2:
LCDOUT $FE, $C0
RETURN
