Printable View
Need help to do reflashing of the VDIP1 module. We tried using flash disk to do so but seems that it has failed. We connected the 5V and GND pins to the signals required. But when we plug in the flash disk, nothing seems to happen. We were wondering, do we need any extra hardware configuration for reflashing VDIP1 module?
Hi,
May be ( ? ) some interesting links here :
http://www.elektor.fr/magazines/2008...b.712338.lynkx
Alain
You need to ground one pin before power up.
For more information see this:
http://www.picbasic.co.uk/forum/showthread.php?t=7700
Regards,
Nick
If you have all of the power pins connected and pin 10 (CTS) connected to ground the LEDs should blink when ever a memory stick is plugged in.
If the stick has a file named
FTRFB.FTD
in the root directory, the VDIP module will start the flash process from there.
VDIP1 is really driving me crazy. Thanks for all the help. Hope it works.
By the way, do we have to do something to the jumper setting for reflashing the VDIP1? Which mode of jumper should we use?
How do we know that the Firmware has been loaded in successfully? The 2 LED's of VDIP1 flashes alternately on powering ON. When flash disk is plugged in, 1st LED ON and 2nd LED OFF for under 1 sec. After that, the state of the 2 LED's change and lastly, the LED state became stable (only LED1 is ON). Does this mean the FW has been loaded in (VDIP1 reflashed)?? The process happened in just few seconds, is this ok?
If you are using serial mode then the two sets of jumpers with three pins should be jumped across 1 and 2 or 2 and 3. It does not matter as long as both are the same.Quote:
Originally Posted by sky071022
The easy way I think is to connect pin 6 through a level shifter (max232) and monitor the VDIP on a terminal. It does not take long to update/change the firmware, small file.Quote:
How do we know that the Firmware has been loaded in successfully?
For that matter , use a terminal to learn how the VDIP works, practice sending commands and reading the feed back.
We are trying to design a product to transfer data using FIFO mode. The problem now is it doesn't show any respond like when we connect it using UART mode. The LED's just ON alternately for 2 seconds only indicating power on. But, when a flash disk is plugged in, nothing happens. What seems to be the problem?:confused:
Should ground all the address lines? Any other hardware config?
By the way, can MCU 8051 be used as a monitor for VDIP1? Is it compatible with VDIP1? Or maybe any other suggestion for the monitor?:o
Thanks.
I have never used FIFO mode...
In UART mode I have the jumper as stated above, the two grounds going to ground, 5 Volt pin connected, CTS(pin 10) to ground, RTS(pin 9) to the PIC for flow control, TXD(pin 6) and RXD (pin 8) going to the PIC for data transfer. all other pins are floating.
MCU 8051is not a serial level converter. To connect the VDIP to a PC you will to invert the signal... MAX232 or similar.
Any PIC that you would recommend to us?
We were planning to use PIC16F688 or PIC16F560. Would that be a good choice?
RTS of VDIP1 is to be connected to which pin of PIC? Any pin of the port?
I think the main thing to consider (in your case) when picking a PIC is to find one that has enough code space ram and I/Os for the application. The smallest PIC I have used with the VDIP1 is a 16F88. As the project progressed I found that I was scrambling for pins. But that happens with a lot of projects. :)Quote:
Originally Posted by sky071022
RTS can be connected to most any pin, just consider ADC and comparators may be on the same pin and need to be shut off.Quote:
RTS of VDIP1 is to be connected to which pin of PIC? Any pin of the port?
Should I include in the program to make PIC to send data to VDIP1 only when RTS is low? Does RTS function in such way?
For the programming part, does it work by just simply sending command through TXD to VDIP1? Any delays to be considered?
Can I have an example of PIC code to make VDIP1 perform data backup of flash drives to another flash drive? We have added an external USB port for VDIP1, but we are just having problems with the programming. We've tried many codes that we wrote ourselves but most fails..
The link given up in post#3 tells all about writing data to the VDIP1.Quote:
Originally Posted by sky071022
Do you mean for upgrading the VDIP1 firmware? Like I said before, the easy way is to have the new firmware on a flash drive. When the VDIP1 starts the firmware will be updated.Quote:
For the programming part, does it work by just simply sending command through TXD to VDIP1? Any delays to be considered?
Nope, I do not have such code.Quote:
Can I have an example of PIC code to make VDIP1 perform data backup of flash drives to another flash drive?
If you post your code we might be able to help you figure out what is wrong.Quote:
We have added an external USB port for VDIP1, but we are just having problems with the programming. We've tried many codes that we wrote ourselves but most fails..
Do we have to send just the command "210D" to VDIP1 to make it fetch data automatically from host Flash drive to slave Flash drive? :confused:
6 days left...
for what?
Going to pass up product. any1 can help???:o
Actually we are suppose to come out with a product for this course we take, known as "System Design".Quote:
Originally Posted by sky071022
We are trying to design a device to perform USB memory backup device. From one USB mass storage to another.
Few posts above are posted by my friends.
We are still having problems with the programming part now.