Symbol not previously defined (EEPROM_START) - PIC16F15325

[richard]

http://support.melabs.com/forum/picb...-accessing-hef
the idea in this thread could be adapted to saf , a quick scan of the data sheet indicates the process to be very similar.
I don't have pbp3.1 or any of those chips to experiment with.

[i'm holding off on pbp3.1 until it works in mplabx properly , if ever]

[mpgmike]

[i'm holding off on pbp3.1 until it works in mplabx properly , if ever]

I was playing with MPLAB 8.90 and MPLAB X trying to figure out how to make them work. It seems like PBP would require it's own .lkr Linker files and a PBP version of a .c Header file to define commands. PBP works with MicroCode Studio, which is an IDE. I suppose the question is; is the issue on Microchip's end or MELabs' end? I believe MPLABX v3.60 still acknowledged PBP, but V4.0 does not.

[MichelJasmin]

Thank you Richard, Henrik & pedja089, I was not aware about the difference between SAF and EEPROM. Will try to adapt the code from the thread mentioned by Richard.

Happy New Year & projects!