Hello to you all,
As PIC16F876A become obsolete I decided to use PIC16F18855 to replace it, it is much cheaper than the old PIC16F876A and has more features.
I implemented the code below (using PBP3) to get sure that the faithfull ELAPSED TIMER from Darrol's would still work with the new PIC
''* Name : test_pic16f18885.PBP *
'* Date : 17-10-2018 *
'* Version : 1.0 *
'* Notes : *
'************************************************* ***************
#CONFIG
__config _CONFIG1, _FEXTOSC_OFF & _RSTOSC_HFINT32 & _CLKOUTEN_OFF & _CSWEN_ON & _FCMEN_ON ; pag 92
__config _CONFIG2, _MCLRE_ON & _PWRTE_ON & _LPBOREN_OFF & _BOREN_ON & _BORV_LO & _ZCD_OFF & _PPS1WAY_OFF & _STVREN_ON & _DEBUG_OFF ;pag 93
__config _CONFIG3, _WDTCPS_WDTCPS_11 & _WDTE_ON & _WDTCWS_WDTCWS_7 & _WDTCCS_LFINTOSC
__config _CONFIG4, _WRT_ON & _SCANE_available & _LVP_ON
__config _CONFIG5, _CP_ON & _CPD_OFF
#ENDCONFIG
DEFINE OSC 08
OSCFRQ = %11
include "DT_INTS-14.bas"
include "Elapsed_INT.bas"
Clear
ANSELA = 0
ANSELB = 0
ANSELC = 0
TRISA=%11111100
TRISB=%11111111
TRISC=%11111111
StatLED VAR PORTA.0
LED var PORTA.1
led =0
main:
led=1 ' to make sure PIC is running
pause 100
if SecondsChanged = 1 then
SecondsChanged = 0
Toggle StatLED ' counting seconds is "alive"
endif
led=1
pause 100
goto main
However the compilation always return:
[ASM ERROR] Symbol not previously defined (INT_ENTRY) (0) : ERROR[113)
[ASM ERROR] Symbol not previously defined (INT_ENTRY) (0) : ERROR[113)
[MESSAGE] pic16lf18855.pbpinc(603): HPWM command only supports CCP channels (not PWM channels).
Can any of you tell me how to solve this?
Thank's in advance
Vicente
Bookmarks