Reading from External Hex Address...

Results 1 to 5 of 5

Threaded View

  1. - 29th October 2008, 12:23 #2
    aratti's Avatar
    aratti
    aratti is offline Senior Member
    Join Date
    May 2008
    Location
    Italy
    Posts
    825

    Did you find this post helpful? Yes | No

    Default

    You can use three push-buttons. Two for up & down to select the address you want to send out. once you have the wanted address on the LCD then you press the send button. This command SEROUT your address code and immediatly you SERIN to listen the answer that you will direct to the LCD after your maths manipulations.

    I have no idea of how many codes you need to handle, but if they are too many and will not fit in the internal eeprom, than you have the chance to use an external memory chip via I2C.

    Al.
    Last edited by aratti; - 29th October 2008 at 12:49.
« Previous Thread | Next Thread »

Similar Threads

  1. Instant Interrupts - Revisited
    By Darrel Taylor in forum Code Examples
    Replies: 772
    Last Post: - 17th February 2016, 23:14
  2. Can't read sequential addresses in external EEPROM
    By tjkelly in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 18th February 2010, 15:46
  3. External EEPROM Not getting data (24LC515)
    By Tom Gonser in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 22nd March 2005, 14:16
  4. Reading a Hex value from a Modem and showing it as Decimal..
    By Tom Gonser in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 16th March 2005, 18:58
  5. 18f452 internal eprom help
    By TONIGALEA in forum mel PIC BASIC Pro
    Replies: 13
    Last Post: - 13th July 2004, 16:50

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules