|
Well, i don't know what else i could suggest...
1. Make sure MCLR/VPP pin goes ~13V while trying to program.
2. try to sit a 0.1 uf on the top of your PIC, between Vdd and Vss pin.
3. Make sure that your programmer is as per their schematic if you built it yourself.
Try with other software, some like IC-PROG seems to show some setting suggestions for each programmer type.
good luck
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
I know what I'd suggest...Originally Posted by mister_e
|
hi
I build another programmer
wen me trying to programme with this new one..
the same error message is shows
wat can I do
http://electronics4everyone.blogspot...rogrammer.html
the above is my 2nd programmer
|
& ju5 t1nk, wit al d@ $$$ u 5p3nt 0n b1ld1n pr0grmr5, u culdv bawt a PICKIT2 & ~ had aneee problem5
|
at the time of flashing, I checked the voltage across MCLR and VSS
around 13 volts is coming
|
Pickit2...???????
|
I made another simple programmer
it shows the same error message
http://www.circuitdb.com/downloadimg.php?fileID=88
|
Wow! PICKIT2. U can shur nok owt b1ld1ng tho53 pr0grmr5 < & >! P1CK1T2. Pr0blm 15...a11 th@ werk & %0000 2 sho 4 17... PICKIT2
=
Wow! PICKIT2. You can sure knock out building those programmers left and right! PICKIT2. Problem is..all that work and nothing to show for it... PICKIT2.
Last edited by skimask; - 29th October 2008 at 18:09. Reason: Translated
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks