mTouch capacitive sensing


Results 1 to 15 of 15

Threaded View

  1. #11
    Join Date
    May 2008
    Location
    Italy
    Posts
    825


    Did you find this post helpful? Yes | No

    Default

    Pedro, your glass pannel could be mounted with retro springs (one at each corner). Place a microswitch in between that validate the choise. The microswitch could be activated only with a finger pressure that you can control using springs that will require the correct compromise between security and usability.

    Another way could be to have a separate switch that should be pressed after that the disabled has found the requested command. A vocal staff could be activated after the selection has been made to tell which command has been chosen and to request the pressing of the abilitation command.

    Al.
    Last edited by aratti; - 29th October 2008 at 14:57.

Similar Threads

  1. 16F726 Capacitive sensing module
    By Byte_Butcher in forum General
    Replies: 39
    Last Post: - 15th May 2014, 19:40
  2. Replies: 81
    Last Post: - 27th January 2010, 23:00
  3. Relaxation oscillators (for capacititive touch sensing)
    By HankMcSpank in forum mel PIC BASIC Pro
    Replies: 24
    Last Post: - 6th December 2009, 22:03
  4. New - Microchip mTouch inductiv sensing
    By Pedro Santos in forum mel PIC BASIC Pro
    Replies: 13
    Last Post: - 7th December 2008, 19:24
  5. Tachometer: Sensing Magneto Points Contact
    By sgoedvolk in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 6th December 2004, 14:31

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts